Page 4 of 55
Re: My NC30 project.
Posted: Mon Mar 15, 2010 8:59 pm
by Polisher
Know how you feel with body work, it took me 5 months to get mine back!!!!
Not to worry though, be on the road for Easter when its getting a bit warmer, hopefully.
Mines not coming out till then at least, cos I'm a soft twat
Re: My NC30 project.
Posted: Mon Mar 15, 2010 9:19 pm
by ibby4585
Yeah they were quite loud, i will have fiddle and find the best combo. still need to give it a good run and check the jetting is correct got a feeling i might need 122 dynojets front and rear!!
Kris
micpec wrote:Kris, I found that that riding without the baffles was a bit too loud...so, after testing this on my ex-NC30 I preferred the nice raspy sounds with the baffles fitted. It also reved much better with the baffles in.
Re: My NC30 project.
Posted: Tue Mar 16, 2010 1:58 pm
by royster81
ibby4585 wrote:Yeah they were quite loud, i will have fiddle and find the best combo. still need to give it a good run and check the jetting is correct got a feeling i might need 122 dynojets front and rear!!
Kris
get in touch,it just so happens i have 122 jets (brand new) and am looking to sell them ....
Re: My NC30 project.
Posted: Tue Mar 16, 2010 2:06 pm
by ibby4585
Thanks Rhory, already got a set though.
Cheers
Kris
Re: My NC30 project.
Posted: Tue Mar 16, 2010 2:26 pm
by royster81
not to worry i'll hang onto themuntil someone needs them,
what colours are you putting on that bodywork since it's got a black frame and rims ? some standard and dark i hope ?
Re: My NC30 project.
Posted: Tue Mar 16, 2010 2:31 pm
by ibby4585
Yeah, doing it in this scheme.
the sprayer is doing both the rvf tyga unit i got from Gareth and a standard seat unit.
I just dont know about white wheels or black ive got both freshly powdercoated!
Re: My NC30 project.
Posted: Tue Mar 16, 2010 2:38 pm
by viper_biker
That would look brilliant. Paul Fallows (an old member from the old site) had a bike in the same scheme with the RVF seat and Silhouette nose. I'm sure someone will have a pic of it somewhere for you.
Re: My NC30 project.
Posted: Tue Mar 16, 2010 2:42 pm
by ibby4585
Yeah that would be good if someone has! I must say ive been a bit anxious about the tyga seat unit as it cost me another 150quid to spray it! But hopefully it will look good.!!
Re: My NC30 project.
Posted: Tue Mar 16, 2010 3:01 pm
by royster81
yours like that witha black frame,swinger,rims....delightful!
the only one i can find on this computer,should a lovely bike that,think shortly after it got GSXR forks and then got sold,Gee you should have a picture of me beside it at Oultan !
Re: My NC30 project.
Posted: Tue Mar 16, 2010 3:24 pm
by viper_biker
I've a few pics from Oulton that year
LOL
