Page 3 of 3
Re: Quick release front wheel spindle
Posted: Fri Feb 03, 2017 12:30 pm
by violetpop
Timon wrote:Got some prices done.
But I still need to get my hands on one to make sure it all fits as it should
then work on the drawings for the RVF
The spindle as a kit are looking to be about the £235 mark plus postage, (this number allows me to recoup my initial outlay)
It would include
VFR front captive front wheel spacer rhs
VFR front captive front wheel spacer lhs
RH fork shim
RH nylon bung
LH nylon bung
VFR spindle
LH fork insert
Socket guide cup (anodised red)
No coating on the spindle is included in this price.
Still interested chaps?
Would this work on RVF front end/wheel?
Sent from my SM-G935F using Tapatalk
Re: Quick release front wheel spindle
Posted: Fri Feb 03, 2017 1:38 pm
by Yakama
Timon wrote:Got some prices done.
But I still need to get my hands on one to make sure it all fits as it should
then work on the drawings for the RVF
The spindle as a kit are looking to be about the £235 mark plus postage, (this number allows me to recoup my initial outlay)
It would include
VFR front captive front wheel spacer rhs
VFR front captive front wheel spacer lhs
RH fork shim
RH nylon bung
LH nylon bung
VFR spindle
LH fork insert
Socket guide cup (anodised red)
No coating on the spindle is included in this price.
Still interested chaps?
Def interested. Sorry work has been mad so I havent had a chance to measure the NC29 yet
Re: Quick release front wheel spindle
Posted: Fri Feb 03, 2017 3:30 pm
by Tim400GB
violetpop wrote:Would this work on RVF front end/wheel?
Sent from my SM-G935F using Tapatalk
No, the RVF has a different length spindle, am working on that one
Re: Quick release front wheel spindle
Posted: Fri Feb 03, 2017 10:18 pm
by violetpop
Will stay tuned
Sent from my SM-G935F using Tapatalk
Re: Quick release front wheel spindle
Posted: Mon Feb 06, 2017 11:42 am
by richyrd5
Bit to much for me timon,but....does the spindle have to use the captive spacers you supply or can you use standard(ie ti captive on mine)??can you just supply nut/bungs/spindle or even spindle on own to get cost down??pm if you like.cheers
Re: Quick release front wheel spindle
Posted: Mon Feb 06, 2017 7:27 pm
by Tim400GB
Yes the spindle etc can be used with standard spacers.
That's not a bad idea to reduce the cost, captive spacers are already available through Rick.
I'll see what that does to the kit cost.
Re: Quick release front wheel spindle
Posted: Tue Feb 07, 2017 12:27 pm
by richyrd5
Excellent.cheers timon...
Re: Quick release front wheel spindle
Posted: Wed Feb 08, 2017 4:14 pm
by Tim400GB
Well the prototype has been ordered, there is a 4 week lead time but I'll let you know how I get on
Re: Quick release front wheel spindle
Posted: Tue Feb 14, 2017 12:14 pm
by richyrd5
Topman.thanks