micpec wrote:Kris, this mail-pigeon just flew back 2 you.

Fit it on one of your NC30's, try it out on a longer bike trip and remember to grab the Ti pipe section just afteryou have shut down the engine for let us say 2 minutes or so...

I will hesitantly try that!!

Any updates, Kris?

micpec wrote:Any updates, Kris?

Still waiting for the can straps from Gavin at the moment, also a few bits were needed from Dave silvers so i can get the forks back on.

I did get this though!!

viewtopic.php?f=17&t=18824

Right my second Project is underway! My 91' NC30 RC30 Replica. I totally stripped it two weeks ago and started cleaning!! Jesus the amount of crap that builds up under the fairings is ridiculous!! I have gone through a acouple of litres of Gunk!! to get it semi respectable!!

It used to look like this!!


but now like this!!



So far ive managed to overhaul the brake system front and back, new pads, discs etc. Carbs have been removed, cleaned, rejetted 122's all round, needles raised and slides drilled. Front forks off and cleaned and polished they will be having new RO internals. Rear suspension linkage cleaned, greased and replaced, Hopefully new rear shock on the way!!.






Still got a few bits to put on including my TSR TI system and a Sillhouette Nosecone, and freshly podwercoated wheels and EBC discs





Its going to be sprayed in the OKI endurance Race colours too!!!



Some of you will notice that the wheels are the wrong colour but mine are going to be white until i can get my hands on some Dymags or PVM's!!

Kris

Wow nice one Kris.

You've already done more than ne and I've had mine since September last year!

I will be watching this build very closely.

Kris, that is awesome project! I know your first project Nc30...simply stunning! And reckon this one is a keeper as well. Keep this topic updated will ya?

Sadly cannot justify to get myself another 2-wheels yet...as the new house is 1st priority.

micpec wrote:Kris, that is awesome project! I know your first project Nc30...simply stunning! And reckon this one is a keeper as well. Keep this topic updated will ya?

Sadly cannot justify to get myself another 2-wheels yet...as the new house is 1st priority.

Cheers Jas.

Yeah i am looking forward to doing this one too. Im just in the stages of gathering all the bits first, i like to do that rather than do a few bits at a time. Just mamaged to get a Maxton rear shock so its well on its way!! Although not much will be done on the next few weeks as work is hectic at the moment!!

Will keep this post updated with info and pics!!

Kris

Right a quick update, forks serviced, fitted, front wheel on, calipers, new pads, new braided hoses fitted.front down pipes on with new bolts, rads on and coolant in. Nice Coerce carbon front hugger on the way. Still waiting for the can straps to fit the ti exhaust. front panels including sillouette nosecone off to the sprayers, just waiting for the rvf seat unit from Gavin. Should be totally finished at the end of this month!! Pics to follow when i get time!!

Kris

Keep it going, mate!

Cheers Jas.

Im off for a few days now , so hopefully i will get the maxton rear shock fitted. Coerce front guard is on its way as my seat unit and my sprayers reckons the panels will be done in 2 weeks!!! so will put some pics up tomorrow!