yayoboy wrote:also would like to try this 2, is it just as simple as drilling two holes in the right place and sending the brake line through?

PM sent

Regards,

Dave.

Thought it was going to be a nightmare but honest it was easy. With the hub out there's loads of room. Feed it in from the front.

here goes mine

How close is that banjo when the chain and sproket is fitted?

That matt black swing arm looks sweet by the way.

fumb wrote:How close is that banjo when the chain and sproket is fitted?

I agree, it would be better to have less angle on the banjo, so that the brakeline can be routed above the caliper and below the swingarm hub - see picture on page 1.

Is the swingarm matt or satin? - love the colour co-ordinated spokes, I've got a set of those too .

Hay boi, have you nicked my wheels?

About clearance...


Its matt black... took me 3 times to paint it due to a deaf bloke at the paint shop who sold me the wrong primer for aluminum... of course the frame too


Fronts zxr,....Thanks to master Oliver

that look nice m8

do you have to use a banjo to connect to the rear caliper? my braided lines appear to just screw in? will post a pic later