Page 2 of 2

Re: Cbr 600 rr swingarm on cbr 400 nc29

Posted: Fri Jan 31, 2014 12:10 pm
by tanuki
why would you increase the wheelbase of a 29 slowing the steering and taking away the whole point of a 400 its sharp handling?

Just a question not trolling.

Re: Cbr 600 rr swingarm on cbr 400 nc29

Posted: Fri Jan 31, 2014 3:17 pm
by ANDYC8888
tanuki wrote:why would you increase the wheelbase of a 29 slowing the steering and taking away the whole point of a 400 its sharp handling?

Just a question not trolling.

My thoughts too.

Re: Cbr 600 rr swingarm on cbr 400 nc29

Posted: Fri Jan 31, 2014 4:04 pm
by ANDYC8888
Unfortunately the earlier ones are 610mm long too.
That plan has just been filed under B1N :down:

Re: Cbr 600 rr swingarm on cbr 400 nc29

Posted: Fri Jan 31, 2014 7:00 pm
by keithyscbr
Im coming to the same conclusion ha ha another idea binned

Re: Cbr 600 rr swingarm on cbr 400 nc29

Posted: Thu Apr 10, 2014 10:53 pm
by PARUS
1. Red lines show how much need to be cut from each size to fit cbr600 swing arm to NC29 frame.
2. Green is extensions you need to fabricate to fit beating into the holes.
3. I'm recommend make extensions first, weld them and only after than cut from each side.

Image
ImageImage


Here is measurement of NC29 swingarm in NC29 frame.
Image