Page 2 of 2
Re: Bargain 1WG 4/6 build :)
Posted: Wed Jul 03, 2013 9:49 am
by Maelstrom
I'm a lumberjack and I'm ok.
I sleep all night and I work all day.
I weld sprocket nuts. I skip and jump. I go to the lavatory.
On Wednesday's I make shitfighters, and have buttered scones for tea.
Sorry it just sprung to mind.
Re: Bargain 1WG 4/6 build :)
Posted: Wed Jul 03, 2013 2:49 pm
by Evilchicken0
Re: Bargain 1WG 4/6 build :)
Posted: Wed Jul 03, 2013 6:08 pm
by Kurlon
He didn't mention suspenders and a bra... so we can't be certain.
Re: Bargain 1WG 4/6 build :)
Posted: Thu Jul 04, 2013 5:28 am
by Maelstrom
I know, I know. I'm suppose to be all 'apolitical'. Try to be be a proper business owner and what have you. But some things just bring out the dark/funny side in me.
Now where did I leave my bra?
Re: Bargain 1WG 4/6 build :)
Posted: Wed Jul 10, 2013 11:04 pm
by barryfzr
I bought the correct thread die (ebay, Chinese) for the thread and knocked up a holder to clean the thread up.
Re: Bargain 1WG 4/6 build :)
Posted: Thu Jul 11, 2013 8:31 pm
by Kurlon
Dunno if you saw this or not already:
http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 3a82d224c1
Cheap 17" wheel conversion if you're handy with a lathe? :D
Re: Bargain 1WG 4/6 build :)
Posted: Thu Jul 11, 2013 8:38 pm
by willandrip
That is the Author of this topic ! (she is very hand with a lathe......... and CNC,and Mig,and oxy/acet and a micrometer and.......................best of all the kettle and cakes (couldn't resist )
Re: Bargain 1WG 4/6 build :)
Posted: Thu Jul 11, 2013 9:40 pm
by Kayla850
willandrip wrote:
That is the Author of this topic ! (she is very hand with a lathe......... and CNC,and Mig,and oxy/acet and a micrometer and.......................best of all the kettle and cakes (couldn't resist )
Thin ice Bill, thin ice...
That's the wheel and swingarm we took out of the donor 600, it's surplus to requirement now we're 'rationalising' the stock (ie getting rid of the stuff that's clogging the workshop up!)
This bike will just be thrown together using the parts we have around the workshop and then thrown to the ebay wolves when it's MOTed and rideable.
Re: Bargain 1WG 4/6 build :)
Posted: Fri Jul 12, 2013 9:27 pm
by willandrip
Kayla850 wrote:willandrip wrote:
That is the Author of this topic ! (she is very hand with a lathe......... and CNC,and Mig,and oxy/acet and a micrometer and.......................best of all the kettle and cakes (couldn't resist )
Thin ice Bill, thin ice...
That's the wheel and swingarm we took out of the donor 600, it's surplus to requirement now we're 'rationalising' the stock (ie getting rid of the stuff that's clogging the workshop up!)
This bike will just be thrown together using the parts we have around the workshop and then thrown to the ebay wolves when it's MOTed and rideable.
I dont go on thin ice, not like this man......... Cat D6R dozer under there somewhere; Good batteries or what ?
Careful you dont hit my new TDM whilst throwing things around the workshop mind. !
Re: Bargain 1WG 4/6 build :)
Posted: Fri Jul 12, 2013 9:53 pm
by Kurlon
Hah, I didn't look at the seller when I found that link, d-oh!
