Bargain 1WG 4/6 build :)

Post by **Maelstrom** » Wed Jul 03, 2013 9:49 am

I'm a lumberjack and I'm ok.
I sleep all night and I work all day.
I weld sprocket nuts. I skip and jump. I go to the lavatory.
On Wednesday's I make shitfighters, and have buttered scones for tea.

Sorry it just sprung to mind.

Post by **Evilchicken0** » Wed Jul 03, 2013 2:49 pm

Do you wish you were a girlie just like your dear papa

Kurlon · Post by **Kurlon** » Wed Jul 03, 2013 6:08 pm

He didn't mention suspenders and a bra... so we can't be certain.

Post by **Maelstrom** » Thu Jul 04, 2013 5:28 am

I know, I know. I'm suppose to be all 'apolitical'. Try to be be a proper business owner and what have you. But some things just bring out the dark/funny side in me.

Now where did I leave my bra?

Post by **barryfzr** » Wed Jul 10, 2013 11:04 pm

I bought the correct thread die (ebay, Chinese) for the thread and knocked up a holder to clean the thread up.

Kurlon · Post by **Kurlon** » Thu Jul 11, 2013 8:31 pm

Dunno if you saw this or not already: http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 3a82d224c1

Cheap 17" wheel conversion if you're handy with a lathe? :D

Post by **willandrip** » Thu Jul 11, 2013 8:38 pm

Kurlon wrote:Dunno if you saw this or not already: http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 3a82d224c1

Cheap 17" wheel conversion if you're handy with a lathe? :D

That is the Author of this topic ! (she is very hand with a lathe......... and CNC,and Mig,and oxy/acet and a micrometer and.......................best of all the kettle and cakes (couldn't resist )

Post by **Kayla850** » Thu Jul 11, 2013 9:40 pm

willandrip wrote:
Kurlon wrote:Dunno if you saw this or not already: http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 3a82d224c1

Cheap 17" wheel conversion if you're handy with a lathe? :D
That is the Author of this topic ! (she is very hand with a lathe......... and CNC,and Mig,and oxy/acet and a micrometer and.......................best of all the kettle and cakes (couldn't resist )

Thin ice Bill, thin ice...

That's the wheel and swingarm we took out of the donor 600, it's surplus to requirement now we're 'rationalising' the stock (ie getting rid of the stuff that's clogging the workshop up!)

This bike will just be thrown together using the parts we have around the workshop and then thrown to the ebay wolves when it's MOTed and rideable.

Post by **willandrip** » Fri Jul 12, 2013 9:27 pm

Kayla850 wrote:
willandrip wrote:
Kurlon wrote:Dunno if you saw this or not already: http://www.ebay.co.uk/itm/Yamaha-FZR400 ... 3a82d224c1

Cheap 17" wheel conversion if you're handy with a lathe? :D
That is the Author of this topic ! (she is very hand with a lathe......... and CNC,and Mig,and oxy/acet and a micrometer and.......................best of all the kettle and cakes (couldn't resist )
Thin ice Bill, thin ice...

That's the wheel and swingarm we took out of the donor 600, it's surplus to requirement now we're 'rationalising' the stock (ie getting rid of the stuff that's clogging the workshop up!)

This bike will just be thrown together using the parts we have around the workshop and then thrown to the ebay wolves when it's MOTed and rideable.

I dont go on thin ice, not like this man......... Cat D6R dozer under there somewhere; Good batteries or what ?

Careful you dont hit my new TDM whilst throwing things around the workshop mind. !

Kurlon · Post by **Kurlon** » Fri Jul 12, 2013 9:53 pm

Hah, I didn't look at the seller when I found that link, d-oh!

Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)

Re: Bargain 1WG 4/6 build :)