Page 2 of 3
Re: advice needed (NC 30/35 loom differences)
Posted: Wed Feb 08, 2012 11:35 pm
by mo haggs
Cool pm me your address and i'll get it in the post,
I'll pay pal you the cost of postage.
I have a 35 left switchgear.
Any thoughts on were i might find the rad fan connector on the 35 loom?
Re: advice needed (NC 30/35 loom differences)
Posted: Wed Feb 08, 2012 11:41 pm
by Drunkn Munky
No its fine dont worry about the postage, if you can wait till friday i'll get the misses to do it through work.
Ive got a scrap 35 (i think) loom in the loft that might still have the rad connector on it, if it has i'll sent it aswell. You want the loom end not the fan end yes? if that makes sense lol
Re: advice needed (NC 30/35 loom differences)
Posted: Thu Feb 09, 2012 12:00 am
by mo haggs
Drunkn Munky wrote:No its fine dont worry about the postage, if you can wait till friday i'll get the misses to do it through work.
Cool
Ive got a scrap 35 (i think) loom in the loft that might still have the rad connector on it, if it has i'll sent it aswell. You want the loom end not the fan end yes?
Thats right, but i can't even see any wires were the connector has been removed 
Re: advice needed (NC 30/35 loom differences)
Posted: Mon Feb 13, 2012 1:55 am
by mo haggs
Just a wee update. Start/kill switch has been replaced withe correct unit (thanx DM)
i found the wires that the radfan plug had been cut off (taped up inside the loom) and have replaced the plug (again thanx DM)
So all i have to do now is swap the nc30 lower rad that i have for an nc35 lower rad
Re: advice needed (NC 30/35 loom differences)
Posted: Mon Feb 13, 2012 8:08 am
by Drunkn Munky
Do you mean rad fan? May have one of them too :)
Re: advice needed (NC 30/35 loom differences)
Posted: Mon Feb 13, 2012 9:29 am
by mo haggs
Lol, fancy a swap?
We'll be swaping wives soon
Re: advice needed (NC 30/35 loom differences)
Posted: Mon Feb 13, 2012 9:36 am
by Drunkn Munky
lol let me dig it out and check first, i never actually fitted it to my rvf so cant be certain it is a rvf one but will grt up in the loft later and check
Re: advice needed (NC 30/35 loom differences)
Posted: Wed Feb 15, 2012 9:33 am
by Drunkn Munky
Mo, not sure if this is 30 or 35
DSC04425.JPG
DSC04426.JPG
Re: advice needed (NC 30/35 loom differences)
Posted: Wed Feb 15, 2012 5:40 pm
by mo haggs
think Thats a 35 unit, just what i need.
I'll get som pics up of the 30 unit i have here and you can check it out.
Re: advice needed (NC 30/35 loom differences)
Posted: Wed Feb 15, 2012 6:20 pm
by mo haggs
