Page 2 of 2
Re: Swingarm/Proarm Nut
Posted: Wed Aug 27, 2008 6:26 pm
by Neosophist
This anygood?

Re: Swingarm/Proarm Nut
Posted: Sat Aug 30, 2008 10:07 pm
by roadrash
The swingarm pivot bolt on the right hand side of the bike is a 27mm the left hand side is a 14mm hex key locked in by the largest of the castle nuts.
When removing mine the alloy corrosion left the nut tight to the frame and the only thing needed to remove the pivot arm was the allen key once the castle was removed. :)