Page 2 of 3

Re: My NC30

Posted: Sat Feb 19, 2011 3:48 pm
by beemerbitz
Managed to sneak away from the missus and hide in my garage and get some more bits sorted. Fitted the Rick O fork upgrade, fit new dust seals, clean the stanchions up and paint the lower legs. Also sorted the discs as well with a fresh couple of coats of satin black. Binned the nasty hoses with ali banjo's as well as the rear original hose.I had to recondition the rear caliper as the pistons were solid due to the dust seals being tatered. Stuck a wavey disc on and some new EBC pads. Fitted new Hel lines front and rear and did the through the swing arm mod as well while it was in bits and fitted an HRC brake reservoir kit. I fitted new Renthal chain and sprockets with standard gearing for the time being until i ride the bike and see how i want the gearing.


Image



Image



Image



Image

Re: My NC30

Posted: Sat Feb 19, 2011 3:51 pm
by alexwitham
Looking real clean there man, keep it coming.

Re: My NC30

Posted: Sat Feb 19, 2011 4:01 pm
by reverse cylinder jim
Really nice work there beemerbitz, will be superb when its done.
James

Re: My NC30

Posted: Sat Feb 19, 2011 4:08 pm
by Delboy
Looking good :drool:

Re: My NC30

Posted: Mon Feb 21, 2011 7:14 pm
by beemerbitz
Thanks for the comments fellas. Seeing all the other bikes on here really inspires me to do a proper job on the bike and not cut corners. I'm currently taking some bits back off i'd fitted because they're not really as good as they could be. I think it comes from being an ex RS bufty boy :whistle:

Re: My NC30

Posted: Mon Feb 21, 2011 7:24 pm
by reverse cylinder jim
beemerbitz wrote:Thanks for the comments fellas. Seeing all the other bikes on here really inspires me to do a proper job on the bike and not cut corners. I'm currently taking some bits back off i'd fitted because they're not really as good as they could be. I think it comes from being an ex RS bufty boy :whistle:
And looking at your username your now into BMW's ?

Re: My NC30

Posted: Mon Feb 21, 2011 7:52 pm
by beemerbitz
No mate. I used to buy and sell BMW parts, it was a username thats kinda stuck with me.

Re: My NC30

Posted: Mon Feb 21, 2011 8:09 pm
by reverse cylinder jim
beemerbitz wrote:No mate. I used to buy and sell BMW parts, it was a username thats kinda stuck with me.
Ah right ....... have you any e30 parts left? :pray:

Re: My NC30

Posted: Mon Feb 21, 2011 8:15 pm
by Hadies
Got any pics of your painted fork lowers mate? I'm looking to do mine this week. Was it a spray can jobby?

Re: My NC30

Posted: Mon Feb 21, 2011 8:32 pm
by beemerbitz
reverse cylinder jim wrote:
beemerbitz wrote:No mate. I used to buy and sell BMW parts, it was a username thats kinda stuck with me.
Ah right ....... have you any e30 parts left? :pray:

Sorry fella i've sold everything off and called it a day now. What were you after?