Argh. There we go with the pulse generator coil (which was disconnected!). Haynes turned up yesterday as it goes and will prove very useful. Also my wiring question has highlighted another issue - in that the loom is routed down the right hand side of the engine not the left as it should! Anyway, shouldn't affect me trying to get it running but did wonder why pulse gen coil wiring was a stretch!

Also found that the small diameter pipe coming from the fuel pump is the drain hose (does this hose just route down and exit as an open pipe at the bottom?)

On a plus I put new oil in and filter on and its all stayed in there. Also connected a power source and pressed starter and sounds like it will turn over :-)

So, will pop new exhaust gaskets on, reattach downpipes and connect fuel pump up at weekend, bit of fresh fuel in and let's see what happens!!

Thanks for help so far...

Rob

VForcer wrote:
Also found that the small diameter pipe coming from the fuel pump is the drain hose (does this hose just route down and exit as an open pipe at the bottom?)

Anyone???

Rob

I think it does, through a bracket near your right foot.

Thank you fella.

Rob

You can see just behind the rearset the pipes and bracket.

That's fab Chris, really appreciate you taking the time to post the pics up

No worries mate, have a look at this link here. Most of the pictures are from my track bike build.

viewtopic.php?f=28&t=5075