Page 2 of 2
Re: vfr nc30 indicaters not working
Posted: Fri Nov 12, 2010 8:39 pm
by rob b
ye matt.
I have just pmd you so if you have'nt its ok. thank you again. If I need one i'll let you know.
Thanks.
Rob.
Re: vfr nc30 indicaters not working
Posted: Tue Nov 16, 2010 11:46 pm
by Lilley
Cammo wrote:
Pretty common problem with nc30's, the switchgear usually just needs a good clean.
Take it apart, spray it with contact cleaner (or wd40) and remove all the grease build up.
By switchgear do you just mean the housing on the handle bar?
Re: vfr nc30 indicaters not working
Posted: Tue Nov 16, 2010 11:52 pm
by porndoguk
Lilley wrote:Cammo wrote:
Pretty common problem with nc30's, the switchgear usually just needs a good clean.
Take it apart, spray it with contact cleaner (or wd40) and remove all the grease build up.
By switchgear do you just mean the housing on the handle bar?
yes he does!