Page 2 of 7

Re: The NSR....the build starts.

Posted: Mon Feb 08, 2010 6:03 pm
by tanuki
chrisja2 wrote:Are the wheels staying gold? That workshop looks mighty bare, wheres the 29?
no mate the wheels are going to be powdercoated White, and the CBR is tucked in the corner.

Text me this cadwell date in march will you please.

Re: The NSR....the build starts.

Posted: Mon Feb 08, 2010 10:31 pm
by chrisja2
Thought you would go for the white wheels, will look awesome me thinks......what date in march for cadwell?

Re: The NSR....the build starts.

Posted: Tue Feb 09, 2010 9:02 pm
by tanuki
Spoke to David the other day and he mentioned something about cadwell at the end of march that you were doing and that he quite fancied....

Re: The NSR....the build starts.

Posted: Mon Feb 15, 2010 4:43 pm
by tanuki
Well I have been busy today Fontyyy came round and out came the engine, I couldnt believe how much stuff had to come off the engine.

this is whats left...

Image

Image

A very dirty engine!!

Image

and I have a few piles of bits like this around the shed...

Image

now the cleaning starts....and a lot of cleaning I have to do!!

Re: The NSR....the build starts.

Posted: Mon Feb 15, 2010 5:20 pm
by viper_biker
RVF style cleaning :ninja: :whistle:

Re: The NSR....the build starts.

Posted: Wed Feb 17, 2010 1:02 pm
by tanuki
you wont let it lie will you!!!

well thats me £380 out of pocket.

2x full top end rebuild kits
1x AFAM chain and sprocket set
1x Full set of wheel bearings and seals
1x pair of goodridge front brake lines
1x set of EBC sintered brake pads

+ the money I spent on cleaning products yesterday....and the money I still have to spend on powdercoat, plus the money I have to spend on paint......this could be expensive!!

Re: The NSR....the build starts.

Posted: Wed Feb 17, 2010 1:11 pm
by chrisja2
How much is a tub of fairy liquid? :whistle: Jeeze i thought you would have been broke after your jaunt to Japan? Might nip round for a brew soon mate.

Re: The NSR....the build starts.

Posted: Wed Feb 17, 2010 4:36 pm
by tanuki
Any time mate...

Re: The NSR....the build starts.

Posted: Sat Feb 20, 2010 4:33 pm
by tanuki
Been in the shed all day with some Gunk, Citil Bang and a load of toothbrushes..

I dont think it turned out to bad..

Image

Image

Image

How many bikes come out of the factory nowadays with this stamped into the crankcase!!

Image

My Radiator soaking in a big bowl of soapy water

Image

and if I pile it all up the I am not so scared of it....

Image

Powdercoat and paint...

Image

I gave the frame a going over but ran out of degreaser, broke the calipers down as well and puzzled over removing the wheel bearings.

next up is to finish degreasing the frame, start polishing out the scratches in the swingarm and start to clean up the stuff in the scarey pile!!

Re: The NSR....the build starts.

Posted: Sat Feb 20, 2010 4:54 pm
by chrisja2
Good work my friend, was a nice sunny but cold day for it. So new Renthal grips on the list too?