Page 2 of 4
Re: NC24 wont start HELP.....
Posted: Wed Jan 20, 2010 10:16 pm
by VfRTeddy
yer spesh cause i sit on it an smoke lol could have got a bit warm lol
Ben
Re: NC24 wont start HELP.....
Posted: Wed Jan 20, 2010 10:25 pm
by spooky
Re: NC24 wont start HELP.....
Posted: Thu Jan 21, 2010 2:13 pm
by VfRTeddy
yip lol
an where abouts does the vacume pipe conect to an should there be 3 pipes comin off the fuel tap?
Ben
Re: NC24 wont start HELP.....
Posted: Thu Jan 21, 2010 2:35 pm
by VfRTeddy
VfRTeddy wrote:yip lol
an where abouts does the vacume pipe conect to an should there be 3 pipes comin off the fuel tap?
Ben
found it now gotta work out which pipe goes where (breather an vacume)
Ben
Re: NC24 wont start HELP.....
Posted: Thu Jan 21, 2010 10:10 pm
by Neosophist
VfRTeddy wrote:VfRTeddy wrote:yip lol
an where abouts does the vacume pipe conect to an should there be 3 pipes comin off the fuel tap?
Ben
found it now gotta work out which pipe goes where (breather an vacume)
Ben
Umm theres 2 pipes from the tank.. big one for fuel and narrow one for vaccum, this connects to cylinder #1 theres a brass takeoff point half way down the barrel.
Re: NC24 wont start HELP.....
Posted: Fri Jan 22, 2010 1:03 am
by VfRTeddy
ok was lookin at it an ive got the main fuel line an 2 smaller nipples on the side aswel i found the vacume pipe which was already attached to the cylinder but not the tank an there was also a breather that was connected to the tank which i took off an cant remember which one it was on originally
Cheers
Ben
Re: NC24 wont start HELP.....
Posted: Fri Jan 22, 2010 1:48 pm
by spooky
AFAIK theres only 2 pipes on the tap, the only other pipe connected to the tank is the tank breather on the top of the tank,

Re: NC24 wont start HELP.....
Posted: Fri Jan 22, 2010 8:08 pm
by VfRTeddy
ill post a pic up on sun an AFAIK??
cheers
Ben
Re: NC24 wont start HELP.....
Posted: Fri Jan 22, 2010 9:09 pm
by Neosophist
The breather runs to a T piece by the airbox that ties in with the airbox and then runs down out the bike.
You should take pictures before you take things apart
Re: NC24 wont start HELP.....
Posted: Tue Jan 26, 2010 1:36 am
by spooky
As Far As I Know = AFAIK
