Official Dyno Day --- Interest?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
Matchlessman
Familiar Member
Posts: 261
Joined: Fri May 02, 2008 12:29 pm
Location: Stroud, Glos
Re: Official Dyno Day --- Interest?

Post by Matchlessman »

Well totally not NC30 but it will be good to see people, just as long as i dont get dirty looks for turning up on a proper honda. :whistle:

Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system :oops: ))
Too many bikes, so little time!
User avatar
CRM
Admin NWAA
Admin NWAA
Posts: 2972
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:
Re: Official Dyno Day --- Interest?

Post by CRM »

Well depending on dates count me in. always up for a laugh. if my project "winter nail" is built by then i will bring that, if not then the UK spec bike with a 3/4 yamamoto and RVF carbs

Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
Insert Signature Here
User avatar
Riley
Site Supporter
Site Supporter
Posts: 228
Joined: Wed Apr 30, 2008 7:53 pm
Location: Gloucester
Re: Official Dyno Day --- Interest?

Post by Riley »

Dependant on when it would be I suspect Psychosomatic and I may attend, its the draw of a bacon butty you know. I run a stock engine, tyga airbox, k+n filter, rvf carbs and an ethos half system. Murray has some engine work, full system, carb tray and jetted carbs. I'll confirm with him today. :smile:
Need any used Nc30 parts? Want to fit a Ducati front end to your Nc30? If so give me a shout.
kevprojex
Site Supporter
Site Supporter
Posts: 113
Joined: Thu Jul 23, 2009 1:11 pm
Bike owned: ktm200exc gsxr400gk71b sv650
Location: Dudley West Mids
Contact:
Re: Official Dyno Day --- Interest?

Post by kevprojex »

Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
8 keprojex (nc30 track bike stock motor with ethos system, k&n,running total loss,modded intake stacks)

CRM bring the 916 as well ill bring my monster in and we can have a ducati :fight:
User avatar
paul nc 24
Site Supporter
Site Supporter
Posts: 114
Joined: Wed Feb 25, 2009 4:32 pm
Bike owned: 2000 R1
Location: WREXHAM
Re: Official Dyno Day --- Interest?

Post by paul nc 24 »

put me down for this :grin: will also do the run to bmc put me down for that .never used a dyno about time i did :oops:
[quote="kevprojex"]Interested People/Bikes:
1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
8 keprojex (nc30 track bike stock motor with ethos system, k&n,running total loss,modded intake stacks)
9 paul nc 24 (nc24 std no mods scorpian can. need carbs sorting and someones got to come last in the power stakes :pray: )

one more thing hamster about your dyno results :scared: :poke: only joking nice one for sorting this out
Twisted_Individual
Settled in member
Posts: 24
Joined: Sat Jul 04, 2009 9:15 pm
Re: Official Dyno Day --- Interest?

Post by Twisted_Individual »

if you sort out a date i might pop down,(im only 3-4 miles away in erdington) cant say a deffinate yes though as i work shitty 4 on 4 off shifts so may be working... NC24 with scorpian can and some seriuosly out of balance carbs!!!! popping...spitting...flaming on the over run!!!!
User avatar
Riley
Site Supporter
Site Supporter
Posts: 228
Joined: Wed Apr 30, 2008 7:53 pm
Location: Gloucester
Re: Official Dyno Day --- Interest?

Post by Riley »

Go on then, date dependant me and Murray are in too.

1. The Hamster (NC30, Almost 100% Stock)
2. Challymo (Not quite stock )
3. Dx4 (NC30, Again not quite stock but no engine modifications)
4. Mrs Druid (NC35, stock except for silencer)
5. Druid (RC24, stock except for exhaust or NC35, totally stock or maybe even both)
6. Matchlessman (NC23 - stock except for exhaust and can - and dynatec coils (and currently non working nitrous oxide system ))
7. CRM (could be anything), coming for the bacon butty, if 916 is rebuilt then that, NC30 or RC30 if not. could bring the RDZ125 and show yers real power
8 keprojex (nc30 track bike stock motor with ethos system, k&n,running total loss,modded intake stacks)
9 paul nc 24 (nc24 std no mods scorpian can. need carbs sorting and someones got to come last in the power stakes )
10. Riley (Stock engine, Tyga air box, K+n filter, Rvf carbs, ethos half system)
11. Psychosomatic88 (Carb tray, fettled carbs [previous owner], some engine work [previous owner], Stainless Hrc rep full system)
Need any used Nc30 parts? Want to fit a Ducati front end to your Nc30? If so give me a shout.
User avatar
CRM
Admin NWAA
Admin NWAA
Posts: 2972
Joined: Sat Apr 05, 2008 2:06 pm
Location: NorthWest
Contact:
Re: Official Dyno Day --- Interest?

Post by CRM »

kevprojex wrote:
CRM bring the 916 as well ill bring my monster in and we can have a ducati :fight:
this is where you drop in that you have a S4RS or something ? prob still one of the most bonkers bikes i have ever ridden until i rode the 1098R a couple of weeks ago, now there is no place for anything that violent on public roads.
916 is undergoing a full rebuild after touching down 2 flywheels. mains are worn so after 30k its time to rebuild. shes been a good ole girl over the years, head refresh 2 years ago with new valves then last year a close one when the pulley tensioner collapsed and cam bearings. belts were trying to eat themselves. but this time its hammer time. if its not ready for the agreed date, then the rc can put in an appearance and smoke everyone out on the overrun in a closed dyno room :oops:
Insert Signature Here
User avatar
Smev
Site Supporter
Site Supporter
Posts: 858
Joined: Tue Apr 29, 2008 8:54 pm
Bike owned: NC30 of course
Location: The Mighty Cornwall :-)
Re: Official Dyno Day --- Interest?

Post by Smev »

Any ideas on a date as I could be interested 8-)
Mister Donut Rep NC30
Spike16
Site Supporter
Site Supporter
Posts: 1670
Joined: Tue Apr 29, 2008 8:56 pm
Bike owned: NC30 Road, SV650 Race
Location: Hampshire, Wichester
Re: Official Dyno Day --- Interest?

Post by Spike16 »

kev mate wana trailer the bikes up together? (its 130 miles) if so id be interested as mine needs setting up

Post Reply