Magic bullet for the rear fairing separation problem

[Lope]

NC24 rear fairing separate from the rear seat all the time.
Anyone got magic bullets for this?

At the moment I'm thinking of 2 black screws, a piece of black wire, and a black rubber band.
Or maybe 2 black screws and a piece of black rubber cut from an old bicycle inner tube or something.

[VfRTeddy]

well on my 24 the right rear keeps commin off cause the top rear if ur with me if foooked so got a scew in there atm holds it on a goodun but wasnt happy about my mate doin it without askin me but i didnt even notice it till it came to take it off lol

[Neosophist]

what the hell are you going on about :D

explain to me your problem! and I shall advise.

[Lope]

Neosophist:
Referring to the rear side fairings, at the front there's a knob that presses into a rubber hole in the tank and a turn secure thing on the frame below that, then at the back of the fairing theres a knob that fits into a rubber thing under the rear seat. that knob doesn't hold.
It always pops out.

VFRTeddy: I didnt think of that. 2 well placed screws will probably not require any rubber bands between them to hold the side fairings in.

[Neosophist]

Ah.

Replace the rubber grommet, it is worn. (try taking it out and turning it around)

Part number

11345-MB0-000