NC30 clutch cable query - ongoing saga!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
NC30 clutch cable query - ongoing saga!
I have an issue with an nc30 clutch cable.
The end of the clutch cable is too large to fit inside the cable adjustor. Rough measurements are below.
Can anyone please confirm which one of these is the correct nc30 part (I'm presuming one of them is!) so that I can order the matching part.
Cheers!
The end of the clutch cable is too large to fit inside the cable adjustor. Rough measurements are below.
Can anyone please confirm which one of these is the correct nc30 part (I'm presuming one of them is!) so that I can order the matching part.
Cheers!
Last edited by Cammo on Fri Mar 12, 2010 8:51 am, edited 1 time in total.
"It's just a ride" Bill Hicks
-
Martin
- Familiar Member
- Posts: 423
- Joined: Thu May 01, 2008 6:34 am
- Bike owned: Street Cripple Arghhhh
- Location: Plymouth, UK
-
banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC30 clutch cable query
Stick a flat screwdriver in the gap and twist it to prize it open a bitStickshift wrote:I have an issue with an nc30 clutch cable.
The end of the clutch cable is too large to fit inside the cable adjustor. Rough measurements are below.
Can anyone please confirm which one of these is the correct nc30 part (I'm presuming one of them is!) so that I can order the matching part.
Cheers!
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
hunter
- Site Supporter
- Posts: 1292
- Joined: Thu Nov 20, 2008 1:09 pm
Re: NC30 clutch cable query
A 9mm Drill Down The Adjuster.
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC30 clutch cable query
Thanks for the replies.
I had thought about drilling it out, but I've seen it done and it doesn't leave the adjustor very strong. Prising it apart might be an option, but I'll try and locate the correct part first.
This is a PITA, I've bought 2 adjustors from ebay now and both are this same size...
I had thought about drilling it out, but I've seen it done and it doesn't leave the adjustor very strong. Prising it apart might be an option, but I'll try and locate the correct part first.
This is a PITA, I've bought 2 adjustors from ebay now and both are this same size...
"It's just a ride" Bill Hicks
-
ozracer
- Settled in member
- Posts: 49
- Joined: Thu Oct 29, 2009 5:04 am
- Bike owned: NC30 Race Bike
- Location: Blue Mountains, Australia
Re: NC30 clutch cable query
The adjuster on my bike had been drilled and it broke. I ended up getting an 8mm cap screw (6mm allen key head) and drilled a 4mm hole all the way through the middle and drilled the head out 9mm. I then cut a slot down one side of the screw. Instant indestructable adjusting screw!!!
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC30 clutch cable query
That's a good idea!ozracer wrote:The adjuster on my bike had been drilled and it broke. I ended up getting an 8mm cap screw (6mm allen key head) and drilled a 4mm hole all the way through the middle and drilled the head out 9mm. I then cut a slot down one side of the screw. Instant indestructable adjusting screw!!!
Might give it a go.
"It's just a ride" Bill Hicks
-
VFR..Al
- Settled in member
- Posts: 114
- Joined: Sun Jun 29, 2008 10:48 am
- Location: Anglesey
Re: NC30 clutch cable query
There are a couple of NC30's being broke in the classifieds section...give the guys a shout as i doubt they would charge much for an adjuster 
Al
Al
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC30 clutch cable query
Yeah will do Al, problem I have is that I've already brought 2 nc30 clutch cable adjustors that don't fit (both from breakers on UK ebay).
I have faith that these were indeed nc30 parts sold to me (know of another dude that has had this same issue). There are 3 clutch cable part numbers to suit nc30's, maybe some are a different size?
Will contact the sellers in the classifieds before going to the effort of making my own I think.
The simplest problems always frustrate the most!
I have faith that these were indeed nc30 parts sold to me (know of another dude that has had this same issue). There are 3 clutch cable part numbers to suit nc30's, maybe some are a different size?
Will contact the sellers in the classifieds before going to the effort of making my own I think.
The simplest problems always frustrate the most!
"It's just a ride" Bill Hicks