Race Can - Pro and Cons of fitting to a Road bike?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
marty400
Familiar Member
Posts: 250
Joined: Thu Jun 19, 2008 2:06 pm
Race Can - Pro and Cons of fitting to a Road bike?

Post by marty400 »

Hiya all,

RE:Race Can - Pro and Cons of fitting to a Road bike?
Saw this Carbon Graeme France Race on Ebay that went for for £46! Gets one thinking....


Does a Straight Through "Race can", ruin the bottom end and Middle of the Rev range on a small 400cc though? (Neighbour who use to own a NC30 said something about back pressure etc.)

Will Police stop and issue points for a loud can?

Does it ruin fuel economy?

How about rideability on uk roads, and Twisties?



Hope you can advise
Martin


PS:
What are the Pros?? 8)
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by leopard_pagan »

most people put a race can on for looks and the way they sound.
few of us do it for better fuel consumption (MUST get carbs re-set up) and extra BHP

depends on your wallet and personal taste.

i have a NC29 with Greame France SSteel headers + a Carbon can co end can= sounds yummy + improved Bhp + better fuel consumption from OEM can.

cops... if the can is stamped with "not for road use" you will get a "pink VDRS? slip" basically take bike to MOT station with OEM can, they check it (not re-mot) and stamp the slip, post it back to police with in 14 days.
SOME cops will give you a fine with the pink slip!
no "not for road use" visible? some cops still give you a pink slip. it all depends on your attitude and if the cops in a good mood!
marty400
Familiar Member
Posts: 250
Joined: Thu Jun 19, 2008 2:06 pm
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by marty400 »

Hiya leo,

Thanks for the input! :)
zul_cbr
Settled in member
Posts: 199
Joined: Mon May 26, 2008 1:39 am
Bike owned: 1990 CBR400RR-L NC29
Location: Malaysia
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by zul_cbr »

leopard_pagan wrote:most people put a race can on for looks and the way they sound.
few of us do it for better fuel consumption (MUST get carbs re-set up) and extra BHP
sis, do u mean by re-jet ? or just by synchronize it only ?
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by leopard_pagan »

re-set up could be anything from re-jetting to balancing...
as i dont know what he/she has (jets/needle size) in the carbs.. i dont know whats required to get them set up correctly for the exhaust system fitted.

it does no harm to any bike to have the carbs balanced up once a year anyway.
zul_cbr
Settled in member
Posts: 199
Joined: Mon May 26, 2008 1:39 am
Bike owned: 1990 CBR400RR-L NC29
Location: Malaysia
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by zul_cbr »

leopard_pagan wrote:most people put a race can on for looks and the way they sound.

i have a NC29 with Greame France SSteel headers + a Carbon can co end can= sounds yummy + improved Bhp + better fuel consumption from OEM can.
hi LP,

could u post up your bike's sound to youtube? i want to hear how 'yummy' it is with GF headers and endcan..
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by leopard_pagan »

lol... if i can find something good to record the sound with 1st! my mobile is crap.

my boss is a sound tech.. i'll ask him.
lazcbr29
Site Supporter
Site Supporter
Posts: 80
Joined: Sat Aug 02, 2008 5:16 pm
Bike owned: kawasaki ar 50, Honda CBR 125
Location: Seaford, East Sussex
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by lazcbr29 »

hiya
ive got a nc29 and its got a cabon can co stainless on it. it has this db killer insert and when i take it out its sounds the nuts but it makes the bike fuelling out when just slipping the clutch pulling away, thats with my 33bhp restrictors in. and before restricted wiv the tip out it had a massive hole between about 4500-6000.. any ideas or would i benefit from gettin the carbs balanced and jetted up??
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by leopard_pagan »

no hole in power, slipping clutch is a clutch issue not carbs.
better fuel consumption if you commute a lot (like i do)
knowing the bike is at its optimum

not many people do it.. but you should re-tune the bike that has 33bhp washers in during the 2years. then again when they are removed.

i STILL havnt found anything worth while to record my bike!
User avatar
brooky
Site Supporter
Site Supporter
Posts: 214
Joined: Tue May 20, 2008 11:29 pm
Bike owned: cbr400,vfr400,crf250,ktm200exc
Location: Heysham
Contact:
Re: Race Can - Pro and Cons of fitting to a Road bike?

Post by brooky »

it has been known for police to issue a means tested fine, not just fixed penalty, its up to the ar5ehole on the day. Personally, i always run unstamped race cans.
Vinylmark signs - for all your bike, car, van, vinyl needs, one off tshirts also printed.
http://www.vinylmarksigns.co.uk" onclick="window.open(this.href);return false; email sales@vinylmarksigns.co.uk

Post Reply