nc21 exhaust problem

nc21jon · Post by **nc21jon** » Fri Oct 23, 2009 10:02 pm

hi,
how can i get a link pipe to make a scorpion cbr600f can fit my nc21.
any ideas??

Post by **Neosophist** » Fri Oct 23, 2009 11:13 pm

Phone scorpion.

The NC21 has product code HA50 I think, the link pipes were about £40

duncan · Post by **duncan** » Fri Oct 23, 2009 11:18 pm

Firstly I would contact Scorpion and ask them for a suitable link pipe,If this fails then I would start thinking.
Do you still have the original link pipe from your nc21?
If so measure its diameter and then measure the diameter it needs to be where it meets your can.Then speak to those nice chaps at Metal Malarky.com [01588-630288] and ask them to make you an adaptor.

nc21jon · Post by **nc21jon** » Sat Oct 31, 2009 7:30 pm

thanks for both replies. i'll see if scorpion can sort me out or maybe get something made up.

Post by **Neosophist** » Sat Oct 31, 2009 7:49 pm

The NC21 has 112/110 jets, you might wanan upgrade to 115's all round if you have a freer flowing endcan

nc21 exhaust problem

nc21 exhaust problem

Re: nc21 exhaust problem

Re: nc21 exhaust problem

Re: nc21 exhaust problem

Re: nc21 exhaust problem