VFR 400 (NC 30) Clutch cable

[dar5150]

Hi
Can anyone tell me if you can fit a clutch cable from an RVF 400 to a VFR 400 NC30 Mate has just broke his and needs one asap. I was going to take the one off the rvf. Cheers for any help.

[viper_biker]

I'd say they are the same' I have a few clutch cables in the house if he's like to buy one, will be really cheap.

[Neosophist]

I don't know what differences there are but they do have differnet part numbers.

NC30: 17950MR8000

NC35: 22870MR8900

[dar5150]

I'd say they are the same' I have a few clutch cables in the house if he's like to buy one, will be really cheap.

Cheers for the reply/offer. I'm based over in Ireland so propably would'ent get it in time off you. Was hoping just to take the one off my RVF track bike for him as he needs it for wed. He lives a good bit away from me as well so did'ent want him travelling all that way for nothing. Thanks again.

[dar5150]

I don't know what differences there are but they do have differnet part numbers.

NC30: 17950MR8000

NC35: 22870MR8900

Seen that alright, could'ent see there being much difference in the two myself. God knows, probably a mm or 2 or something stupid like that. Thanks for the help anyway.

[Neosophist]

I don't know what differences there are but they do have differnet part numbers.

NC30: 17950MR8000

NC35: 22870MR8900

Seen that alright, could'ent see there being much difference in the two myself. God knows, probably a mm or 2 or something stupid like that. Thanks for the help anyway.

It's probably a bend in the cable due to the way its routed. It probably won't be too hard to make one fit :)