Fork Protectors - Do I glue down? With what?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
marty400
Familiar Member
Posts: 250
Joined: Thu Jun 19, 2008 2:06 pm
Fork Protectors - Do I glue down? With what?

Post by marty400 »

Hiya All,

I'm getting the below, and I'm figuring out the best way to put them on!
http://www.wizbizltd.co.uk/public/viewp ... TagList=46


They are cable ties, so I don't need to drop the forks out etc.


Should I glue them on as well, for piece of mind?
Whats the best ahesive to use? (Something that won't damage the fork lacquire etc. THat will be easy to take off - If I ever need to have the forks dropped out etc etc.)

Superglue too OTT?
Threadlock - just to "hold" them on?
Use nothing best?


Hope you can advise!

Martin
Top
binge
Settled in member
Posts: 41
Joined: Sun Jun 15, 2008 8:45 pm
Re: Fork Protectors - Do I glue down? With what?

Post by binge »

Good quality cable ties will be suffice.
Top
leopard_pagan
Senior Member
Posts: 1184
Joined: Thu May 01, 2008 6:42 am
Bike owned: CBR400/600 Fighter
Location: Mildenhall-Suffolk
Contact:
Contact leopard_pagan
Re: Fork Protectors - Do I glue down? With what?

Post by leopard_pagan »

big chunky cable ties with metal holder bit will be fine.
glue them in place and you wont get them off when you change fork seals.
Top
Post Reply

Return to “Honda - Workshop”