Ram air boxes.......whose using them

[Cammo]

Hi, i could be well off the mark here, but cant you just plumb the tank breather into the air box as well, to save using a fuel pump?
Wouldnt the positive pressure( in the air box) equal to the tank then you'd still have the head pressure as normal?

There's probably a bit of trial and error in that, but yes it could be made to work. There are maybe no guarantees that the mount for a tank breather will definitely see the same pressure as the carbs until it's measured. With a fuel pump it covers all scenarios.

I think mopst peeps will settle on a fuel pump because it gets around this unknown entirely.

[viper_biker]

Fuel pump is a gift and easier and more reliable. Tony, the ram-air to set-up the way I did it was a piece of piss (if I can do it, you could too) and simple to get working on VFR carbs.

[Drunkn Munky]

Cheers Gareth im coming round to the idea of getting my hands dirty with it. However ive just got back from putting a daytime MOT on it, 1st time ive rode it since my last trackday and strip down which was a good few months ago and lets just say i took the long route home. Fooking love riding this bike and the new can sounds rude at full chat. I had to stop half way there and connect the rev limit wire to +12v as id forgot but other than that she was a little TROUSER FIREWORK, now i can ride on the road i can start playing with the ram air setup and test it as i go instead of hoping for the best when i get to the track. If the yammoto i got for sale sells then im gunna tap Aly up for his RLR carbs if not then i'll mod mine.