Bandit 400 engine in GK73a

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
badbannedbiker
Settled in member
Posts: 125
Joined: Fri Jun 13, 2008 6:25 pm
Bike owned: nc29 nc30 gsxr750 T675 CRF450
Bandit 400 engine in GK73a

Post by badbannedbiker »

Sorry for the cross posting.

A question. Is the Bandit 400 engine the same as a GK73a? Looks very similar in the manual I'm looking at.

TIA
Top
M1KE
Settled in member
Posts: 141
Joined: Fri May 02, 2008 6:45 pm
Re: Bandit 400 engine in GK73a

Post by M1KE »

Yes it will fit.
Top
knight1077
Site Supporter
Site Supporter
Posts: 33
Joined: Mon Sep 21, 2009 8:36 pm
Bike owned: gsxr 400 gk73a
Location: brigg lincolnshire
Re: Bandit 400 engine in GK73a

Post by knight1077 »

magic just the info i was looking for just goes to show hours of trawling through old posts is worth the time, man i love this site :up:. thanks chaps i am off shopping :worthy:
i think the throttle jammed officer
Top
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: Bandit 400 engine in GK73a

Post by Variablevalves suck »

Like 'Mike' said fits as same casings, few minor differences, cam timing may/may not be diff, sproket cover looks diff(purly cosmetic), ignition trigger may be slightly diff (may have to swop to run original cdi, MIKE, do you know? Garyola's got one in his 73) and the front lower fairing mount is not used on the B4 so just knock out the plugs and fit your rubbers over.
Top
knight1077
Site Supporter
Site Supporter
Posts: 33
Joined: Mon Sep 21, 2009 8:36 pm
Bike owned: gsxr 400 gk73a
Location: brigg lincolnshire
Re: Bandit 400 engine in GK73a

Post by knight1077 »

lovely thanks variable will look into it i have a 73 engine but it is dead am going to get round to stripping it some time soon if i cant get something cheap to put in the frame. was trying to avoid messing about but supose it will keep me out of trouble and in the shed over the winter months, might give it a propper going over so might be in touch for some of those viton o rings i will keep you posted, thanks again.
i think the throttle jammed officer
Top
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: Bandit 400 engine in GK73a

Post by Variablevalves suck »

Wot do you mean by dead? do you have a major mechanical problem, or is it just not running? forgot the major difference, that being you need to swop over the sump and oil pickup to allow for the differnt run of the exhausts or fit a B4 exhaust.
Chris.
Top
knight1077
Site Supporter
Site Supporter
Posts: 33
Joined: Mon Sep 21, 2009 8:36 pm
Bike owned: gsxr 400 gk73a
Location: brigg lincolnshire
Re: Bandit 400 engine in GK73a

Post by knight1077 »

hi chris ye its a major, major problem was doing about, well lets just say more than 30mph :roll: and lost all compresion did all the usual checks all bolts tight plugs then did the only thing i could do after pushing it the 2 miles home (kicked it then went in the house and sulked) got on here and had a look for an engine. There was a few strange noises that i can remember as it rolled to a stop. Thats not the worst thing, I HAD JUST FILLED IT UP not happy.
Ye i remember reading some thing about the 73 was the only one with that sump same if you put a 71 engine in i think.
but the good news is found some on with a 73 engine, but it is handy to know these things for the future as i love the bike will be keeping it for a while
thanks for the help anthony
i think the throttle jammed officer
Top
Post Reply

Return to “Suzuki - General”