NC29 - Taking apart the instrument panel - speedo / rpm etc.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
zul_cbr
- Settled in member
- Posts: 199
- Joined: Mon May 26, 2008 1:39 am
- Bike owned: 1990 CBR400RR-L NC29
- Location: Malaysia
- Contact:
Re: NC29 - Taking apart the instrument panel - speedo / rpm etc.
It's completely a one set unit.
this is mine when i took it apart.
get yourself NC23 clocks.
this is mine when i took it apart.
get yourself NC23 clocks.
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: NC29 - Taking apart the instrument panel - speedo / rpm etc.
definite hacksaw job. id cut away the speedo AND lights. id then get 2 LEDs with 12V resistors and make my own "idiot lights" Red= oil, green= neutral, mount a plate where the old speedo was, fit idiot lights there + any other gadgets you may need.
**if you dont know how to make your own idiot lights, email me as i have built/tested these for several people. you pay for parts/my time/postage and i'll even give you wiring instructions for a NC23/29 .not normally over £10-15.
PS if your going to hack a dash.. id buy a 2nd one off ebay/GF to hack. that way the original dash can be fitted back later on if need be.
**if you dont know how to make your own idiot lights, email me as i have built/tested these for several people. you pay for parts/my time/postage and i'll even give you wiring instructions for a NC23/29 .not normally over £10-15.
PS if your going to hack a dash.. id buy a 2nd one off ebay/GF to hack. that way the original dash can be fitted back later on if need be.