carb sync

Post by **Deviant400** » Thu Sep 24, 2009 8:57 pm

I had my carbs sync'd up today and WOW what a difference , i couldnt belive how much better the bike runs and feels , my hat goes off to old greg at bob missen in melksham he is a star , he stripped away the the plastics and got to work job was done in 35 mins or so, carb tune thingy showed the carbs to be a little out of sync not majorly but they were all at diffrent levels just, so a quick fiddle and they were all level , then the old tube up the exhaust for a reading on the machine and the mixture was brought into line, she purrs loverly now at idle i even think she sounds diffrent too, so much better,
in all the best £40 ive spent this year , without a doubt,

Post by **Neosophist** » Thu Sep 24, 2009 11:06 pm

You might consider getting yourself a morgan carbtune and an angled screwdriver off their website and you can do future synch's yourself, plus friends etc etc :)

If the carbs are in synch it probaby will sound different compare to unbalnaced carbs that are 'lumpy'

Post by **micpec** » Sun Sep 27, 2009 12:25 am

Neosophist wrote:...consider getting yourself a morgan carbtune and an angled screwdriver off their website and you can do future synch's yourself, plus friends etc etc :)
....

Funny that...I've ordered them this week, and there're in the post rightnow to me...

Post by **royster81** » Sun Sep 27, 2009 8:40 am

micpec wrote:
Neosophist wrote:...consider getting yourself a morgan carbtune and an angled screwdriver off their website and you can do future synch's yourself, plus friends etc etc :)
....
Funny that...I've ordered them this week, and there're in the post rightnow to me...

i'll be interested to hear how you get on with them jason, can you post the results up on here please fella ?

rich1988 · Post by **rich1988** » Mon Sep 28, 2009 4:46 pm

do you have a number for him? my carbs need balancing and syncing badly!

Post by **Neosophist** » Mon Sep 28, 2009 4:49 pm

rich1988 wrote:do you have a number for him? my carbs need balancing and syncing badly!

where are you? if your close to me i don't mind doing it for you :)

rich1988 · Post by **rich1988** » Mon Sep 28, 2009 4:57 pm

Im just outside marlborough but am very willing to travel, I am sure it needs doing because it runs a bit lumpy despite having done the plugs filters etc

Post by **micpec** » Mon Sep 28, 2009 10:52 pm

royster81 wrote:
micpec wrote:
Neosophist wrote:...consider getting yourself a morgan carbtune and an angled screwdriver off their website and you can do future synch's yourself, plus friends etc etc :)
....
Funny that...I've ordered them this week, and there're in the post rightnow to me...
i'll be interested to hear how you get on with them jason, can you post the results up on here please fella ?

Rhory, morgan is located in belfast, should be near your location, right?
Still waiting...

Post by **micpec** » Thu Oct 08, 2009 4:04 pm

Received them today...(Now I'd need to make some free time to start with the winter maintenance on the RVF...)

Post by **Neosophist** » Thu Oct 08, 2009 7:13 pm

micpec wrote:Received them today...(Now I'd need to make some free time to start with the winter maintenance on the RVF...)

Ah-a same as mine :)

Doddle to use

carb sync

carb sync

Re: carb sync

Re: carb sync

Re: carb sync

Re: carb sync

Re: carb sync

Re: carb sync

Re: carb sync

Re: carb sync

Re: carb sync