Carb Needle Shimming.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Carb Needle Shimming.
Hi there,
I have some Shims from Rick-O i'm going to put in a set of NC24 carbs. There running standard needles (8ZC) and as per the parts book they already have a shim under them, I'm not sure if Rick's shims are slightly thicker than the ones already in there or if they are the same.
Either way, shall I leave them both in there or just use Ricks if there slightly thicker?
I have some Shims from Rick-O i'm going to put in a set of NC24 carbs. There running standard needles (8ZC) and as per the parts book they already have a shim under them, I'm not sure if Rick's shims are slightly thicker than the ones already in there or if they are the same.
Either way, shall I leave them both in there or just use Ricks if there slightly thicker?
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Carb Needle Shimming.
I think you'll find that they'll be about the same thickness (or not far from different).
If that is the case then put one of each back in.
If that is the case then put one of each back in.
"It's just a ride" Bill Hicks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Carb Needle Shimming.
Ok great :) I thought you'd reply to this :DStickshift wrote:I think you'll find that they'll be about the same thickness (or not far from different).
If that is the case then put one of each back in.
Many thanks...
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...