Carb rubbers

Post by **Deviant400** » Sat Sep 12, 2009 7:25 pm

can anyone suggest the best place to get new carb rubbers, im gunna be doing my shims in the next week or so , (also might need to replace some shims too if they do them too) and would like to seat the carbs on some fresh rubber while im putting it all back together. and also do the rubbers come with new clamps as mine are shagged reallyand could do with replacing

its a NC30 by the way, cheers

Post by **Sligeach** » Sat Sep 12, 2009 9:02 pm

david silver spares

Post by **Deviant400** » Sat Sep 12, 2009 9:08 pm

koolio

Post by **Sligeach** » Sat Sep 12, 2009 9:52 pm

i cant find my reciept but thing they are a fiver each and do not come with the jubilee clip

Post by **Cammo** » Sat Sep 12, 2009 10:24 pm

NC35 carb rubbers are easier to use, I would choose them over NC30 rubbers every time.

frizzybone · Post by **frizzybone** » Sat Sep 12, 2009 11:20 pm

Stickshift wrote:NC35 carb rubbers are easier to use, I would choose them over NC30 rubbers every time.

will the NC35 carb rubbers fit on an NC30??

Post by **Cammo** » Sat Sep 12, 2009 11:57 pm

frizzybone wrote:
Stickshift wrote:NC35 carb rubbers are easier to use, I would choose them over NC30 rubbers every time.
will the NC35 carb rubbers fit on an NC30??

Yes. The shape allows the carbs to go back on more easily.

Nothing much wrong with the nc30 rubbers, but if you take the carbs off lots then go for nc35 items.

Post by **micpec** » Sun Sep 13, 2009 2:27 am

Stickshift, I went to see some 400cc riders of the dutch forum today...we've checked the
differences of using NC35 carb rubbers on NC30 carbs....there was a lot more free play
if you compare it to usage of standard NC30 carb rubbers on NC30 carbs (last one is way tight as usual). Any trick with using the NC35 carb rubbers on NC30 carbs?

Carb rubbers

Carb rubbers

Re: Carb rubbers

Re: Carb rubbers

Re: Carb rubbers

Re: Carb rubbers

Re: Carb rubbers

Re: Carb rubbers

Re: Carb rubbers