Which reg rectifier to use

Coe · Post by **Coe** » Fri Sep 04, 2009 10:42 am

Hi folks,

I currently re building my NC30 from scratch. It's up and running now. It has the original reg rectifier on it and seems to work fine. Would you recommend upgrading it now or when or wait and see if it fails?

If upgrade is recommended which is the best and easiest reg rec to put on it?

Many thanks.

Post by **CMSMJ1** » Fri Sep 04, 2009 10:56 am

As long as the wiring from genny and uip to the reg rec is not showing any charred areas or dodgy conenctions then use what you have.

If you want to get one when that one fails..get a Yamaha one

Welcome to the site

m6rk · Post by **m6rk** » Fri Sep 04, 2009 11:27 am

i got one of an 5sl r6..

can someone confirm the wiring for it?

Post by **Cammo** » Fri Sep 04, 2009 11:07 pm

The pic below shows which way the wires go around. If you get the green and red around teh wrong way, you'll blow the main fuse. It doesn't matter which yellow wire goes where. Probably a better idea to use insulated connectors than what I've used here (since changed).

These regs are about 4 times as big as the honda ones... good stuff!

Post by **Neosophist** » Sat Sep 05, 2009 2:58 am

Stickshift wrote:The pic below shows which way the wires go around. If you get the green and red around teh wrong way, you'll blow the main fuse. It doesn't matter which yellow wire goes where. Probably a better idea to use insulated connectors than what I've used here (since changed).

These regs are about 4 times as big as the honda ones... good stuff!

I love that picture, it makes me go omg if they touch

garyboy_palaboy · Post by **garyboy_palaboy** » Mon Sep 07, 2009 1:06 pm

.

i used a Yamaha R6 ('06) rectifier and it works perfectly.

.

Which reg rectifier to use

Which reg rectifier to use

Re: Which reg rectifier to use

Re: Which reg rectifier to use

Re: Which reg rectifier to use

Re: Which reg rectifier to use

Re: Which reg rectifier to use