what is this pipe for

therefused · Post by **therefused** » Mon Jul 27, 2009 2:15 pm

hi.

i have a pipe sticking out of the first cylinder inlet below the carb. it has a screw in it at the moment and some oil residue around it.

what is this pipe?

Post by **CMSMJ1** » Mon Jul 27, 2009 2:24 pm

There are vacuum points on all 4 clyinders. Likely to be one of those.

No1 cylinder is back and left? That one?

therefused · Post by **therefused** » Mon Jul 27, 2009 3:45 pm

its the front left. should this be blocked?

Post by **CMSMJ1** » Mon Jul 27, 2009 3:54 pm

yes, should be blocked. It is used for carb balancing, you attach the vacuum gauge to the little pipe - there should be the same on all cylinders and the one from cyl 3 goes to the fuel tank and opens the fuel tap when the motor is running

nemesis · Post by **nemesis** » Mon Jul 27, 2009 7:58 pm

If the pipe is there for the vacuum tap , it could of once been a chain oiler pipe

what is this pipe for

what is this pipe for

Re: what is this pipe for

Re: what is this pipe for

Re: what is this pipe for

Re: what is this pipe for