Misfires when warmed up- advice please.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 5
- Joined: Fri Mar 20, 2009 1:28 pm
Misfires when warmed up- advice please.
Hello all,
I have an RVF, it starts 1st time of the button and runs very smoothly to start with.
However when it is up to temperature it starts to misfire on at least one cylinder.
Is this a fault that someone has come across and can give some advice on before I start forking out for new plugs and coil packs etc??
Thank you
Scott
I have an RVF, it starts 1st time of the button and runs very smoothly to start with.
However when it is up to temperature it starts to misfire on at least one cylinder.
Is this a fault that someone has come across and can give some advice on before I start forking out for new plugs and coil packs etc??
Thank you
Scott
-
- Settled in member
- Posts: 5
- Joined: Fri Mar 20, 2009 1:28 pm
Re: Misfires when warmed up- advice please.
Any advice is appreciated
- CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: Misfires when warmed up- advice please.
can you ID which cylinder and is it definitely a misfire rather than some other random noise?
I would check your HT leads are secure, that the earths are secure and try to figure out which cylinder and at what temp this is happening.
plugs are known for benig fragile so it could be breaking down under temp and missing??
I would check your HT leads are secure, that the earths are secure and try to figure out which cylinder and at what temp this is happening.
plugs are known for benig fragile so it could be breaking down under temp and missing??
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
- Familiar Member
- Posts: 315
- Joined: Sun May 25, 2008 10:41 am
- Bike owned: '30
- Location: Durban, RSA
Re: Misfires when warmed up- advice please.
If it runs smooth initially then its prob not an electrical problem, tho as CMSMJ1 said these plugs are delicate.. At what rev range does it mis? By mis do you mean a regular interruption to the usual firing.. Any changes to engine recently like a service?
-
- Site Supporter
- Posts: 1027
- Joined: Wed Apr 30, 2008 8:40 pm
- Bike owned: zx9r c1
- Location: killin,scotland
Re: Misfires when warmed up- advice please.
is it possibly running rich?is the choke stuck open at all?
sounds like a problem with fueling as it happens when warm,but runs fine whilst cold.
double check electrical components just to rule them out.
wull
sounds like a problem with fueling as it happens when warm,but runs fine whilst cold.
double check electrical components just to rule them out.
wull
please,god,....give me the chance to prove that winning the lottery won't spoil me!!!
-
- Settled in member
- Posts: 5
- Joined: Fri Mar 20, 2009 1:28 pm
Re: Misfires when warmed up- advice please.
Thanks for the advice guys,
Its definately a misfire, but im having a problem identifying which cylinder as by the time ive got the rear fairing a nd tank off the bike has cooled down and runs properly.
The bike itself is not overheating and the two spark plugs that are easy to get to look to be in good condition so I guess need to try checking the harder plugs to reach! I have a feeling it may be one of the coils breaking down when it gets hot.
The only recent work to the bike is a new battery............ hmm I shall persist!
Thanks again.
Its definately a misfire, but im having a problem identifying which cylinder as by the time ive got the rear fairing a nd tank off the bike has cooled down and runs properly.
The bike itself is not overheating and the two spark plugs that are easy to get to look to be in good condition so I guess need to try checking the harder plugs to reach! I have a feeling it may be one of the coils breaking down when it gets hot.
The only recent work to the bike is a new battery............ hmm I shall persist!
Thanks again.
-
- Settled in member
- Posts: 39
- Joined: Wed Jun 24, 2009 8:50 am
- Location: Cape Town, South Africa
Re: Misfires when warmed up- advice please.
Check if all the cylinders are firing by checking the tempreture of each down pipe. the wet clothe test...
- abrmoto
- Moderators
- Posts: 728
- Joined: Wed Apr 30, 2008 10:52 pm
- Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
- Location: Wigan
- Contact:
Re: Misfires when warmed up- advice please.
Does it run fine when on the road?
Could be a leak on vacum pipe to fuel tap if not, running out/ restricted fuel flow. had this on one on my RVF before now.
Could be a leak on vacum pipe to fuel tap if not, running out/ restricted fuel flow. had this on one on my RVF before now.
-
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Misfires when warmed up- advice please.
I had a missfire once, held the pipe and it was cold, without thinking I held the other pipe.. had white burn on my hand for days! *ouch*mambraNC30 wrote:Check if all the cylinders are firing by checking the tempreture of each down pipe. the wet clothe test...
Expensive yes but get a new set of plugs in there first :) Fragile plugs
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
- Settled in member
- Posts: 39
- Joined: Wed Jun 24, 2009 8:50 am
- Location: Cape Town, South Africa
Re: Misfires when warmed up- advice please.
finger lickin good KFC.I had a missfire once, held the pipe and it was cold, without thinking I held the other pipe.. had white burn on my hand for days! *ouch*
remove the plugs and clean all four of them first and check if you get spark from all four of them. if not then buy a new set. then go from there.Expensive yes but get a new set of plugs in there first :) Fragile plugs
maybe the missfire is caused by a cylinder getting to much fuel and fouling the plug.
