NC23 pistons to NC29. Will fit ?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
NC23 pistons to NC29. Will fit ?
Just wondering. Will NC23 pistons same as NC29 ? And are there any benefits to fit this to NC29? I heard that RVF pistons give better compression. But what about NC23 pistons?
-
dannc29
- Settled in member
- Posts: 55
- Joined: Fri Jun 12, 2009 11:53 am
- Location: Australia
Re: NC23 pistons to NC29. Will fit ?
not sure about the nc23 but the rvf pistons are worth it. the crown is alot higher then the nc29's and there's no piston to valve issue. piston to head brings it to .70mm which is about as much as you want.
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: NC23 pistons to NC29. Will fit ?
I had possibility to buy set of NC23 pistons. Was like to check can I use them at NC29. Ok, thank you. Will be looking for NC35 pistons.not sure about the nc23 but the rvf pistons are worth it. the crown is alot higher then the nc29's and there's no piston to valve issue. piston to head brings it to .70mm which is about as much as you want.