brembo calipers and master cylinder for nc29

[silver]

Hello guys!
Can anyone tell me if i can change the calipers on my nc29 with brembo 40mm and if i need to do any modifications?Also I want to change my brake master cylinder with a radial brembo one,which ratio i have to use for the master cylinder?19x20 is good?if anyone have done this modifications i would like to know how.
Thanks in advance.

[tanuki]

there are no direct bolt on replacments for the 29 save your money and service your standard ones there's nothing wrong with them.

[garyboy_palaboy]

.



my bike have them.... i used Brembo 19x20 Brake Master and Brembo Floating Disk Calipers with Galfer Wave Rotors... awesome stopping power!









.

[PARUS]

Hello guys!
Can anyone tell me if i can change the calipers on my nc29 with brembo 40mm and if i need to do any modifications?Also I want to change my brake master cylinder with a radial brembo one,which ratio i have to use for the master cylinder?19x20 is good?if anyone have done this modifications i would like to know how.
Thanks in advance.

You need adapter to fit brembo 40mm calipers. I would recommend buy from jap4performance adapter for Brembo 60mm and fit this 60mm calipers. Master cylinder fit easy.

http://www.youtube.com/watch?v=44t_mJwi ... annel_page
http://www.youtube.com/watch?v=GdidEdhr ... annel_page

[silver]

Thanks guys!
Parus, you have done great modifications ,too bad that I cannot understand Russian!
For the master cylinder you did not changε anything to fit it? neither the brake lever?
Ι would be grateful if you could tell me more information about this modification,and why to use a brembo 60mm and not 40 mm?
Also,garyboy_palaboy you have a great bike,nice project!

[PARUS]

Thanks guys!
Parus, you have done great modifications ,too bad that I cannot understand Russian!
For the master cylinder you did not changε anything to fit it? neither the brake lever?
Ι would be grateful if you could tell me more information about this modification,and why to use a brembo 60mm and not 40 mm?
Also,garyboy_palaboy you have a great bike,nice project!

Hi mate,

For the master cylinder you don't need to modify anything. Just use Brembo with brake lever (original no fit to Brembo master cylinder). I have use original brake fluid reservoir and bracket for this, just little bit change position of reservoir. Easy modification really. But you need hydraulic brake switch.

As for the calipers. You need calipers and adaptor to fit Brembo calipers to NC29 forks. This is not easy to fabricated and better to buy them, but problem is that I didn't find any seller selling this adaptor, just for FZ6N and other I have listed in video. Gavid selling adaptor for 60mm brembo calipers and I recommend to use this one, because it will be easy for you to buy them.

As for the benefits - for the current moment Brembo master cylinder is really great thing and allow to work only with one finger, for the calipers I'm really expect more and for the current moment I don't see any difference (but only rice 2 day to work and back, so this is small experience... let you know more soon...)