NC30 Headstock Nut
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
dbanbery
- Settled in member
- Posts: 22
- Joined: Thu Apr 02, 2009 11:19 am
NC30 Headstock Nut
What size socket/spanner do i need for this? its bigger than a 32mm as thats the biggest size ive got.
basically my head race bearings need tightening up/replacing as the front end wobbles under braking. i have tightened it up a bit by tightening up the c-spanner nut under the top yoke with a chisel and it made the problem less severe.
basically my head race bearings need tightening up/replacing as the front end wobbles under braking. i have tightened it up a bit by tightening up the c-spanner nut under the top yoke with a chisel and it made the problem less severe.
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC30 Headstock Nut
41mm dude
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
dbanbery
- Settled in member
- Posts: 22
- Joined: Thu Apr 02, 2009 11:19 am
Re: NC30 Headstock Nut
excellent, cheers matey.