
Samco hoses for NC29
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 35
- Joined: Thu Apr 23, 2009 8:40 am
- Location: Brisbane, Australia
Samco hoses for NC29
Are there any decent suppliers for these hoses ?? Most of the stock ones on wifes bike are rooted and Samco's must be cheaper than Honda's 

-
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: Samco hoses for NC29
they are all over e bay...
-
- Settled in member
- Posts: 35
- Joined: Thu Apr 23, 2009 8:40 am
- Location: Brisbane, Australia
Re: Samco hoses for NC29
Only found one (and that was on ebay UK).
Anyone recommend a supplier ? Don't want to end up with a dodgy chinese ripoff....
Anyone recommend a supplier ? Don't want to end up with a dodgy chinese ripoff....
-
- Familiar Member
- Posts: 267
- Joined: Sun May 04, 2008 9:43 am
Re: Samco hoses for NC29
.
up for this topic.....i wanted to change my hoses with samco.
mine are little bit old.
.
up for this topic.....i wanted to change my hoses with samco.
mine are little bit old.
.
-
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: Samco hoses for NC29
This is to pricey update just to changes pipes... but as for the view looks cool...garyboy_palaboy wrote:.
up for this topic.....i wanted to change my hoses with samco.
mine are little bit old.
.
-
- Familiar Member
- Posts: 267
- Joined: Sun May 04, 2008 9:43 am
Re: Samco hoses for NC29
PARUS wrote:This is to pricey update just to changes pipes... but as for the view looks cool...garyboy_palaboy wrote:.
up for this topic.....i wanted to change my hoses with samco.
mine are little bit old.
.
yup i know they might be pricey.....not only because of looks but might be because of quality as well.
.
-
- Settled in member
- Posts: 35
- Joined: Thu Apr 23, 2009 8:40 am
- Location: Brisbane, Australia
Re: Samco hoses for NC29
Well this has been a complete farce from the start...
Went to RaceBikeBitz.....and once I made them realise that they could not charge me VAT as I was not in the EU they ordered some up.....About 5 weeks later they turned up here....
Excitedly I opened the package....obviously their idea of 'complete' is different to mine. The 2 from the block to the water pump were missing as was the one that goes down around the starter motor.....as well as all the 1/4" ones to the radiator....
So I got on the phone...
'Oh yeah, They (samco) have updated their kit....We'll send out the extra ones.....Another 45 pounds please
(at least I got them freepost this time)
Got them today and......no 1/4" hoses...or hoses clips....so the wifes naked 400 still has a mix of black and purple hoses...
I have emailed them....I await their reply....
Went to RaceBikeBitz.....and once I made them realise that they could not charge me VAT as I was not in the EU they ordered some up.....About 5 weeks later they turned up here....
Excitedly I opened the package....obviously their idea of 'complete' is different to mine. The 2 from the block to the water pump were missing as was the one that goes down around the starter motor.....as well as all the 1/4" ones to the radiator....

So I got on the phone...
'Oh yeah, They (samco) have updated their kit....We'll send out the extra ones.....Another 45 pounds please

Got them today and......no 1/4" hoses...or hoses clips....so the wifes naked 400 still has a mix of black and purple hoses...

I have emailed them....I await their reply....

-
- Settled in member
- Posts: 35
- Joined: Thu Apr 23, 2009 8:40 am
- Location: Brisbane, Australia
Re: Samco hoses for NC29
Useless reply for racebike...so I rang Samco direct and spoke to Mark Smith.
Bearing in mind they don't deal direct with the public...(you have to go through a dealer)....I have a 2m length of 1/4" purple on its way to me F.O.C. as a goodwill gesture.

Bearing in mind they don't deal direct with the public...(you have to go through a dealer)....I have a 2m length of 1/4" purple on its way to me F.O.C. as a goodwill gesture.

-
- Familiar Member
- Posts: 267
- Joined: Sun May 04, 2008 9:43 am
Re: Samco hoses for NC29
.
do you have any picture out there to share?
im planning to change my hose into samco.
.
do you have any picture out there to share?
im planning to change my hose into samco.
.
-
- Settled in member
- Posts: 35
- Joined: Thu Apr 23, 2009 8:40 am
- Location: Brisbane, Australia
Re: Samco hoses for NC29
Jeez...its been a while since I logged in here..
Well the F.O.C. hose arrived 5 days after I spoke to Mark....so much for the Racebikebitz 'special order, 6 weeks mate'
Here's some pics of them fitted..
[img]http://i419.photobucket.com/albums ... .jpg[/img]
[img]http://i419.photobucket.com/albums ... .jpg[/img]
[img]http://i419.photobucket.com/albums ... .jpg[/img]
And the new muffler...Copy of a Supertrapp with nice alloy can, cheap internals (replaced with st/st parts)
[img]http://i419.photobucket.com/albums ... .jpg[/img]
Well the F.O.C. hose arrived 5 days after I spoke to Mark....so much for the Racebikebitz 'special order, 6 weeks mate'
Here's some pics of them fitted..
[img]http://i419.photobucket.com/albums ... .jpg[/img]
[img]http://i419.photobucket.com/albums ... .jpg[/img]
[img]http://i419.photobucket.com/albums ... .jpg[/img]
And the new muffler...Copy of a Supertrapp with nice alloy can, cheap internals (replaced with st/st parts)
[img]http://i419.photobucket.com/albums ... .jpg[/img]