Wrong master cylinder!

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
drifterwannab
Settled in member
Posts: 91
Joined: Thu Nov 27, 2008 3:55 pm
Wrong master cylinder!

Post by drifterwannab »

Hi all

always considered my front brake to be a bit crap, looking at some NC23 pictures today and it appears my bike has got a front brake master cylinder off a Aero on it. (mines a 89 rrk)

will having the aero master make the front brakes crap?
drifterwannab
Settled in member
Posts: 91
Joined: Thu Nov 27, 2008 3:55 pm
Re: Wrong master cylinder!

Post by drifterwannab »

thoughts anyone?
PARUS
Senior Member
Posts: 1160
Joined: Tue Apr 29, 2008 10:01 pm
Bike owned: Already 20% of NC29...
Location: Seattle, USA
Contact:
Re: Wrong master cylinder!

Post by PARUS »

drifterwannab wrote:Hi all

always considered my front brake to be a bit crap, looking at some NC23 pictures today and it appears my bike has got a front brake master cylinder off a Aero on it. (mines a 89 rrk)

will having the aero master make the front brakes crap?
As for my experience doesn't matter is this aero or triarm or cullarm - all of them is almost the same in case you didn't change calipers for bigger ones. Just clean your master cylinder and change brake fluid. And pump it properly.
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7161
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Wrong master cylinder!

Post by CMSMJ1 »

PARUS is spot on mate. :geek:

Give the whole lot a good clean and fresh fluid and it should be sorted..
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

Post Reply