Thinking about buying...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
blutonium92
- Settled in member
- Posts: 14
- Joined: Sat Mar 21, 2009 12:59 pm
Thinking about buying...
Atm my NC30 has the stock can so = boring...
Was looking at:
http://cgi.ebay.co.uk/HONDA-VFR400-VFR- ... 240%3A1318" onclick="window.open(this.href);return false;
But how would these fit? i know you have to cut the old one off but where? and how does the new one attach?
I would probably pay a dealership to fit it tbh, wouldnt want to fock it up.
Thanks,
Blutonium
Was looking at:
http://cgi.ebay.co.uk/HONDA-VFR400-VFR- ... 240%3A1318" onclick="window.open(this.href);return false;
But how would these fit? i know you have to cut the old one off but where? and how does the new one attach?
I would probably pay a dealership to fit it tbh, wouldnt want to fock it up.
Thanks,
Blutonium
-
aaron0288
- Settled in member
- Posts: 140
- Joined: Wed Apr 30, 2008 5:28 pm
- Bike owned: NC30
- Location: Beccles, Suffolk
Re: Thinking about buying...
If you're standard system is in good nic, see if you can find an already cut system on fleabay for not much money.
The cut should be made just above the heatshield, and you'll need a link pipe to fit the new can. Contact Rick Oliver off this forum.
The cut should be made just above the heatshield, and you'll need a link pipe to fit the new can. Contact Rick Oliver off this forum.
If there's one thing I've learned, it's that life is one crushing defeat after another, until you just wish Flanders was dead.
-
blutonium92
- Settled in member
- Posts: 14
- Joined: Sat Mar 21, 2009 12:59 pm
Re: Thinking about buying...
Well its the stock system, but the guy who owned it before said he had a leovince on it but then put stock can back on because his ears are pussies, so it looks like its been rewelded back on about 10iches below the end of the can