Flywheel/rotor puller??

Post by **dobbslc** » Fri Feb 27, 2009 11:08 pm

I need a puller to get the rotor off my crank (3TJ)does anyone know what size I need or who sells them?
Thanks

Post by **cagiva996** » Fri Feb 27, 2009 11:50 pm

take out a bar end wieght and use that as your puller-it works!!

Post by **dobbslc** » Sat Feb 28, 2009 7:57 pm

OK tried the bar end weight but no joy, This is a BDK light weight rotor and won't budge.
I've tried heat, cold, then force but it's not moving any more ideas?

Post by **Evilchicken0** » Sat Feb 28, 2009 8:03 pm

Plastic Explosive ...

Post by **dobbslc** » Sat Feb 28, 2009 8:12 pm

I can get the gun powder type!

Post by **cagiva996** » Sun Mar 01, 2009 8:17 pm

Ring bdk and ask what they use-theyll only be to pleased to give you advice especially as your using one of their products,they must remove and replace them all the time!

Post by **Evilchicken0** » Sun Mar 01, 2009 11:12 pm

Flywheels can be b'stards to get off

Marb · Post by **Marb** » Sun Mar 01, 2009 11:21 pm

Get yourself one of those 2000W heat-paintstrippers (the haridryer on steroids type) and blow dry the rotor for about 10mins. Should pop right off with the barend rotorpuller! :)

Post by **dobbslc** » Mon Mar 02, 2009 9:46 pm

I got "medieval on it's ass with a blow torch but no pliers" but it still won't budge
I,ve ordered a 4 way flywheel puller so will try that when I get it as the end weight is a bit soft and stripped when I gave it some stick.

Thunderbike_steve · Post by **Thunderbike_steve** » Tue Mar 03, 2009 1:23 am

I'm after one of those rotors, just dont want to pay the price bdk are asking for what is bacially a metal disk. Anyone know where you can get them cheaper?

Flywheel/rotor puller??

Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??

Re: Flywheel/rotor puller??