Rear Hub NC24??
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 114
- Joined: Mon May 12, 2008 7:35 pm
- Bike owned: NC24
- Location: Isle of Wight
Re: Rear Hub NC24??
Iv just looked on the parts list i have (not complete!!) and it shows a stepped axle which holds both the rear disc on and the rear sprocket(the nut sits on the sprocket side) once the nut is off does the spindle need to be hammer out?
-
- Settled in member
- Posts: 12
- Joined: Fri Dec 05, 2008 5:24 pm
Re: Rear Hub NC24??
Maybe this could help...christ044 wrote:Iv just looked on the parts list i have (not complete!!) and it shows a stepped axle which holds both the rear disc on and the rear sprocket(the nut sits on the sprocket side) once the nut is off does the spindle need to be hammer out?

-
- Settled in member
- Posts: 114
- Joined: Mon May 12, 2008 7:35 pm
- Bike owned: NC24
- Location: Isle of Wight
Re: Rear Hub NC24??
Hi there,
Thats the same picture im working off, iv got the sprocket side off but cant get the shaft out now, any idea what item 7 in the drawing is? That seams to be holding the shaft in and i cant figure out just how to get it off??
Thats the same picture im working off, iv got the sprocket side off but cant get the shaft out now, any idea what item 7 in the drawing is? That seams to be holding the shaft in and i cant figure out just how to get it off??
-
- Settled in member
- Posts: 114
- Joined: Mon May 12, 2008 7:35 pm
- Bike owned: NC24
- Location: Isle of Wight
Re: Rear Hub NC24??
Got it sort, item 24 is a snap ring, pop that off and the whole bearing section just slides off!
There was that much rubbish all over it I couldnt see the snap ring!
Thanks for all the help, im sure there will be stupid questions to come!
Chris
There was that much rubbish all over it I couldnt see the snap ring!
Thanks for all the help, im sure there will be stupid questions to come!
Chris
-
- Settled in member
- Posts: 12
- Joined: Fri Dec 05, 2008 5:24 pm
Re: Rear Hub NC24??
We'll be looking forward to your stupid questions and answer them without making you look like a complete baboonchrist044 wrote:Got it sort, item 24 is a snap ring, pop that off and the whole bearing section just slides off!
There was that much rubbish all over it I couldnt see the snap ring!
Thanks for all the help, im sure there will be stupid questions to come!
Chris

-
- Settled in member
- Posts: 114
- Joined: Mon May 12, 2008 7:35 pm
- Bike owned: NC24
- Location: Isle of Wight
Re: Rear Hub NC24??
Trust me that wont be hard!!
Many thanks

Many thanks