NC24: Rear Wheel <-> Sprocket clearance normal?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
speedfreak87
- Settled in member
- Posts: 19
- Joined: Fri Feb 14, 2014 7:03 am
- Location: Germany - Dortmund
- Contact:
NC24: Rear Wheel <-> Sprocket clearance normal?
Hey guys,
is it normal that I can turn the rear wheel (while on a jack) about 0,5cm to 1,0cm before the sprocket/chain starts moving?
I have mentioned the clearance this Weekend while cleaning the bike. Is it normal on the NC24
Or do you think that the dampers are worn out? See number 2:
https://www.cmsnl.com/honda-vfr400rii-n ... ml#results
greetings
Kai
is it normal that I can turn the rear wheel (while on a jack) about 0,5cm to 1,0cm before the sprocket/chain starts moving?
I have mentioned the clearance this Weekend while cleaning the bike. Is it normal on the NC24
Or do you think that the dampers are worn out? See number 2:
https://www.cmsnl.com/honda-vfr400rii-n ... ml#results
greetings
Kai
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC24: Rear Wheel <-> Sprocket clearance normal?
sounds normal, its the slack in the cush-drive rubbers..
you can take off the cushdrive cover to see the actual phsyical condition of the rubbers..
you can take off the cushdrive cover to see the actual phsyical condition of the rubbers..
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...