NC35 rear hub disassembly
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
manicguitarist
- NWAA Supporter
- Posts: 353
- Joined: Mon Oct 06, 2014 11:39 am
- Bike owned: RVF400 (NC35)
- Location: Rossendale, Lancashire
Re: NC35 rear hub disassembly
Holy thread resurrection batman!
I need to change rear disc. So hub needs to come out.
My Haynes book of lies doesn't mention a circlip. What circlip?
And confirm 46mm for hub nut? Before I go to the tool shop tomorrow...
I need to change rear disc. So hub needs to come out.
My Haynes book of lies doesn't mention a circlip. What circlip?
And confirm 46mm for hub nut? Before I go to the tool shop tomorrow...
-
jedidude04
- Settled in member
- Posts: 66
- Joined: Thu Jun 30, 2016 2:19 am
- Bike owned: RVF400
- Location: Australia, NSW
Re: NC35 rear hub disassembly
Big nut on left is 46mm, i use an impact socket. I get the hub off by unstaking it, using a breaker bar, have the rear brake pedal held down with bottle of oil and wheel on the ground. No problems. Hub torque is i think 210 nm however - TIGHT.
I think there is a circlip but i removed my entire piece from the swingarm and cant remember it.
And yeah holy thread resurrection lul
I think there is a circlip but i removed my entire piece from the swingarm and cant remember it.
And yeah holy thread resurrection lul