Nc30 / 35 main fairing mount hole centres ??

Post by **hawksuspension** » Fri May 12, 2017 3:08 pm

Anyone happen to know of top of head the headstock mount hole centre's distance ?

For both the 30 and 35 if possible

magg · Post by **magg** » Tue May 16, 2017 5:29 am

Any chance of more details of what it is you want measured.

Foxy400 · Post by **Foxy400** » Tue May 16, 2017 11:06 am

magg wrote:Any chance of more details of what it is you want measured.

Glad you said that. I don't understand what he wants either. Thought I was just being thick.

Post by **hawksuspension** » Tue May 16, 2017 6:29 pm

Sorry chaps!!!

So on the main stay fairing brackets.... where they bolt to the headstock there are 2 holes top and bottom..

i could do with the measurement (length) from hole centre to hole centre distance on bracket or headstock... im looking to run a nc30 or 35 bracket on something else so would like dimensions if possible

Sound any better

magg · Post by **magg** » Wed May 17, 2017 2:27 am

If you are talking about the top fairing bracket, where it mounts on the chassis, the distance between the mount holes is 175mm.

Post by **vic-vtrvfr** » Wed May 17, 2017 9:13 am

Or do you mean the pitch between the 2 holes where the metre stay bracket connects onto the headstock of the bike?

Nc30 / 35 main fairing mount hole centres ??

Nc30 / 35 main fairing mount hole centres ??

Re: Nc30 / 35 main fairing mount hole centres ??

Re: Nc30 / 35 main fairing mount hole centres ??

Re: Nc30 / 35 main fairing mount hole centres ??

Re: Nc30 / 35 main fairing mount hole centres ??

Re: Nc30 / 35 main fairing mount hole centres ??