Help please
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
sijrayner
- Settled in member
- Posts: 4
- Joined: Fri Jul 22, 2016 7:18 am
Help please
My NC24 will not run on 4, the carbs have been cleaned, I've checked for sparks but the front right cylinder refuses to fire. The plug is wet with fuel, I'm no mechanic but when u get fuel and flame why oh why do I not get fire. I took it to a shop and they are about to give up as well. I don't want to scrap it but it's heading that way so any idea could help.
They say they cannot find any info on coil resistance etc. Everyone knows about NC30's but no info for 24's
They say they cannot find any info on coil resistance etc. Everyone knows about NC30's but no info for 24's
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: Help please
Try switching the coils around and see if the problem transfers to the other cylinder
-
magg
- Senior Member
- Posts: 1916
- Joined: Mon Sep 20, 2010 11:55 pm
- Bike owned: VFR400
- Location: Blue Mountain NSW Australia
Re: Help please
You have three coils that fire, measure a couple and use the readings to test the suspect. If readings ok then check wiring to the non-firing coil. Still no luck then maybe dud ignition unit. NC24 ignition unit has 4 outputs as opposed to NC30/35 that has only 2 that drive double ended single coils.