Vfr 400 nc24 wont start no spark

thoz · Post by **thoz** » Mon Oct 10, 2016 3:58 pm

Hi I have a nc24 that was working fine last Wednesday I went to start it this morning and nothing it just cranks over but seems to have no spark at all although I have yet to check this properly as my tools are at my place and the bike isn't. Just wondering if any one had any ideas as to what the problem maybe be as it's always fired even when it's not started. I've just sprayed rear sub frame and give it a good clean and it was fine for 2 days after putting it back together now it's dead seems strange to me

arsey30 · Post by **arsey30** » Mon Oct 10, 2016 4:41 pm

Check CDI connectors.

thoz · Post by **thoz** » Mon Oct 10, 2016 6:38 pm

I've checked those it all seems ok and was working before it stopped. Is there any way to check the cdi it's self?

Post by **Neosophist** » Fri Oct 14, 2016 7:15 pm

have you checked it for spark yet?

seems like it would be something to do with anything you've disconnected around the subframe area.

Unless of course it is coincidental failure.

dudleygareth · Post by **dudleygareth** » Thu Jan 26, 2017 3:58 am

Hi thoz did you get it sorted ?

Sent from my SM-G900H using Tapatalk

dudleygareth · Post by **dudleygareth** » Sat Jan 28, 2017 11:11 am

Hi my bike doing the same got no spark at all.How do I test a cdi?

Sent from my SM-G900H using Tapatalk

magg · Post by **magg** » Sun Jan 29, 2017 1:35 am

So you have used the wiring diagram and a multimeter to check that +12v is available at the ignition coils and the ignition control unit?

Vfr 400 nc24 wont start no spark

Vfr 400 nc24 wont start no spark

Re: Vfr 400 nc24 wont start no spark

Re: Vfr 400 nc24 wont start no spark

Re: Vfr 400 nc24 wont start no spark

Re: Vfr 400 nc24 wont start no spark

Re: Vfr 400 nc24 wont start no spark

Re: Vfr 400 nc24 wont start no spark