RCV213 replica build
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
gpmotorsports
- Settled in member
- Posts: 16
- Joined: Thu Nov 28, 2013 8:05 pm
RCV213 replica build
just a few pics of the latest build - its going to be a replica of the RCV213 MotoGP bike, will have 2014 Motogp bodywork with inverted swingarm, Ti exhaust etc
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: RCV213 replica build
Very interested to see how this turns out!! 
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: RCV213 replica build
I do like your builds, alway full on 
-
Morespeedvicar
- Site Supporter
- Posts: 837
- Joined: Thu May 01, 2008 1:37 am
- Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
- Location: Grimsby
Re: RCV213 replica build
Nice car too.....What swingarm you using?
-
gpmotorsports
- Settled in member
- Posts: 16
- Joined: Thu Nov 28, 2013 8:05 pm
Re: RCV213 replica build
the builds are just for fun, terrible carryover from a life spent building and owning racebikes.
so for this build I am using an R1 swingarm the 14B model, have currently got a 6.25" rear test fitted (I have way too many 16.5 motogp wheels so a good excuse to use them up lol)
the bike will be finished with a set of genuine motogp fairings from either Dani's or Marc's RCV, just waiting for the tream to send me a set so I can fit/alter to suit the RVF, plans for the tank are using a CBR600RR tank modified to fit the RVF and the cover
any question please ask away
Murf
so for this build I am using an R1 swingarm the 14B model, have currently got a 6.25" rear test fitted (I have way too many 16.5 motogp wheels so a good excuse to use them up lol)
the bike will be finished with a set of genuine motogp fairings from either Dani's or Marc's RCV, just waiting for the tream to send me a set so I can fit/alter to suit the RVF, plans for the tank are using a CBR600RR tank modified to fit the RVF and the cover
any question please ask away
Murf
-
Tim400GB
- Site Supporter
- Posts: 753
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
-
265chemic
- Settled in member
- Posts: 33
- Joined: Thu Jul 28, 2011 5:48 am
- Bike owned: 98cbr600f,08cbr1000rr,90vfr400
- Location: Brisbane, QLD, Australia
Re: RCV213 replica build
Man I'm surprised you can get hold of actual 213v fairings. How much do they set you back if you dont mind me asking?
-
gpmotorsports
- Settled in member
- Posts: 16
- Joined: Thu Nov 28, 2013 8:05 pm
Re: RCV213 replica build
not as much as you'd think
I can get GRP copies at reasonable money around £800 set
I can get GRP copies at reasonable money around £800 set
-
gpmotorsports
- Settled in member
- Posts: 16
- Joined: Thu Nov 28, 2013 8:05 pm
Re: RCV213 replica build
Change in plans means I am looking to sell the parts I have for my RCV replica project, these include
R1 Swingarm modified to fit RVF frame
R1 14B linkages
R1 14B shock
1 x Set 16.5 PVM MotoGP wheels with SBK Brembo discs (wheels are new unused)
open to offers
Thanks
Mark
R1 Swingarm modified to fit RVF frame
R1 14B linkages
R1 14B shock
1 x Set 16.5 PVM MotoGP wheels with SBK Brembo discs (wheels are new unused)
open to offers
Thanks
Mark