starting issue
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- leef82
- Site Supporter
- Posts: 165
- Joined: Wed May 12, 2010 5:21 pm
- Bike owned: vfr400 nc30
- Location: boston lincs
starting issue
hi all, I've got a recurring starting issue, if its left longer than a month it would start then cut out.. I've cleaned the carbs twice and thought i had solved the problem as it started again and ran fine in the garden... hasn't been out on the road for a few years as i had been restoring the bike. anyway started yesterday then turned it off to take a phone call... went to start it again but it was running very quiet as if it was struggling...
since this i have checked the fuel tap, checked if fuel is getting to the float chambers which it is, checked the spark which seems a bit weak so i put my old spark plugs back which are sparking better. but all I'm getting is a backfire....
its bugging me as it had new seals in the carbs in april, new mounting rubbers, new battery, rick o solenoid conversion, earth upgrade....
anyone got any ideas?
lee
since this i have checked the fuel tap, checked if fuel is getting to the float chambers which it is, checked the spark which seems a bit weak so i put my old spark plugs back which are sparking better. but all I'm getting is a backfire....
its bugging me as it had new seals in the carbs in april, new mounting rubbers, new battery, rick o solenoid conversion, earth upgrade....
anyone got any ideas?
lee
-
- Settled in member
- Posts: 51
- Joined: Sat Feb 27, 2016 5:06 am
Re: starting issue
Hi it's nc30 right check your sims it causes that problem
Sent from my SM-G900H using Tapatalk
Sent from my SM-G900H using Tapatalk