NC30/35 Titanium - Wheel, Hub & Yoke Nuts

[JZH]

Four+ years later, might be some demand for these again?

Ciao,

[jedidude04]

I would be interested in a 46mm hub nut if these were to be made again - are they stakeable/reusable?

Cheers

[JZH]

I've since discovered that there is a Triumph rear axle nut available from many places, including this one in titanium on UK eBay: 221550013684 (£33) It is re-usable, but I guess that means the axle needs to have holes drilled (and it is one hard M-F...) for the clip.

And Titan Classics makes the wheel side nut in titanium: https://titanclassics.com/product/titan ... wheel-nut/ (£29) They also do the swing arm pinch bolt for £22. (also on UK eBay)

Aftermarket top yoke nuts for the NC30/RC30 are an uncommon size, but I bought one from Lightech, so they are available in alloy, anyway.

Ciao,

[jedidude04]

Cheers man, unfortunately i'm not really interested in drilling the axle and stuff..i may just stick with the oem nut unless something else pops up.