It may be time to say goodbye...
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 173
- Joined: Wed Apr 30, 2008 8:19 pm
- Location: Brighton & Hove
Re: It may be time to say goodbye...
I picked up the VFR750 today, lucked out on the gap in the clouds and brought her home the 150 miles in (mostly) bright suinshine!
She's a bit scruffy round the edges but nothing serious. The riding position is further forward than I'd like, as it made my neck and back ache... BUT:
She's awesome to ride! She feels light, well balanced and the torque from the V4 is sublime! I'm going to have to be careful... I was cruising along at one point thinking to myself, she cruises lovely at 80mph; then I looked down to see the needle just nudging the 100! Oops! She's fast, but without any fuss or drama so it doesn't feel it. I think she was pulling around 6,000 rpm at a ton, rather than the 10,000 that the SF would have been!
So I reckon some bar risers and a new rear tyre and she'll be a good 'un. :D
She's a bit scruffy round the edges but nothing serious. The riding position is further forward than I'd like, as it made my neck and back ache... BUT:
She's awesome to ride! She feels light, well balanced and the torque from the V4 is sublime! I'm going to have to be careful... I was cruising along at one point thinking to myself, she cruises lovely at 80mph; then I looked down to see the needle just nudging the 100! Oops! She's fast, but without any fuss or drama so it doesn't feel it. I think she was pulling around 6,000 rpm at a ton, rather than the 10,000 that the SF would have been!
So I reckon some bar risers and a new rear tyre and she'll be a good 'un. :D
-
- Settled in member
- Posts: 147
- Joined: Thu Jul 10, 2008 11:26 am
- Location: okehampton
Re: It may be time to say goodbye...
glad you like it dude, sounds like someones gonna be grinning alot once they got their mods done :D they werent the best sports tourer ever for no reason :D
- Mansie
- Settled in member
- Posts: 100
- Joined: Thu May 08, 2008 10:19 am
- Bike owned: CB400 Four NC36, NT650V
- Location: Cambridgeshire
- Contact:
Re: It may be time to say goodbye...
Good luck with your new ride mate! Hang on to your CB400 till the new bike is sorted out.
Cheers, Mansie
Cheers, Mansie
-
- Settled in member
- Posts: 173
- Joined: Wed Apr 30, 2008 8:19 pm
- Location: Brighton & Hove
Re: It may be time to say goodbye...
Ah, wise words mate! If only I had...Hang on to your CB400 till the new bike is sorted out.
I was showing off the VFR to a work mate this afternoon, and noticed a small pool of fluid on the front wheel. On closer inspection, it turns out that the braided hose banjo on the RH caliper is weeping brake fluid

I gently rode home, figuring that nothing dramatic was likely to happen, especially if I braked as little as possible

That is, until I pulled up outside my gaff 35 minutes later. A rather large pool of coolant suddenly appeared under the engine.



I've got a horrible feeling that I've sold my trusted and reliable (and fun) 400 and bought a lardy lazy pile of sh1t instead... At least the brake fluid leak is an easy fix. God knows where the coolant's coming from though.
Anyone wanna buy a VFR750? One careful owner (several not-so-careful owners...)

-
- Settled in member
- Posts: 147
- Joined: Thu Jul 10, 2008 11:26 am
- Location: okehampton
Re: It may be time to say goodbye...
meh fookin ebay 

- Matchlessman
- Familiar Member
- Posts: 261
- Joined: Fri May 02, 2008 12:29 pm
- Location: Stroud, Glos
Re: It may be time to say goodbye...
Hey Alex,
There are bound to be teething troubles. have a look and see if there are any split or leaking hoses etc.
With the brake banjo, you might be able to nip the bolt up a bit, failing that it should just need a new brass washer.
The 750 is a cracking bike, it sounds like yours just needs some tlc!
There are bound to be teething troubles. have a look and see if there are any split or leaking hoses etc.
With the brake banjo, you might be able to nip the bolt up a bit, failing that it should just need a new brass washer.
The 750 is a cracking bike, it sounds like yours just needs some tlc!
Too many bikes, so little time!
-
- Settled in member
- Posts: 173
- Joined: Wed Apr 30, 2008 8:19 pm
- Location: Brighton & Hove
Re: It may be time to say goodbye...
Aye, thanks for the advice Matchlessman.There are bound to be teething troubles. have a look and see if there are any split or leaking hoses etc.
With the brake banjo, you might be able to nip the bolt up a bit, failing that it should just need a new brass washer.
The 750 is a cracking bike, it sounds like yours just needs some tlc!
I've replaced the copper washers either side of the banjo fitting, and the brakes are now sorted. :D
I had a look under the fairing at the cooling system and the expansion tank has been over-filled, so I'm hoping that's the cause of the sudden coolant loss.


-
- Settled in member
- Posts: 147
- Joined: Thu Jul 10, 2008 11:26 am
- Location: okehampton
Re: It may be time to say goodbye...
so glad it wasnt a big deal man, felt rly sad for you.
-
- Settled in member
- Posts: 173
- Joined: Wed Apr 30, 2008 8:19 pm
- Location: Brighton & Hove
Re: It may be time to say goodbye...
Cheers Meno!