pillion peg mounts
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
newtothis
- Settled in member
- Posts: 100
- Joined: Mon Jul 07, 2014 10:06 pm
- Bike owned: YZF R125, RVF400, Morini 3 1/2
- Location: Beds at night
pillion peg mounts
I'm looking to put some pillion pegs back onto my RVF, forgive me if this is a daft question but would the NC30 mounting brackets fit the NC35? I'm thinking of the ones without the integral exhaust hanger on the left.
It's the general shape as they curve under the rear bodywork that is of interest. Re-drilling the mounting holes or even making up adapter plates to carry them would be feasible - as long as they are going to end up in about the right place.
It's the general shape as they curve under the rear bodywork that is of interest. Re-drilling the mounting holes or even making up adapter plates to carry them would be feasible - as long as they are going to end up in about the right place.