NC30 1mm Neelle Shimms (Washers)

st22041967 · Post by **st22041967** » Thu Jul 21, 2016 10:51 am

Hi Guys, am thinking of doing the mod to improve the flat spot on the NC30. Rick Oliver suggests a 1mm thick washer. However what sort of inside and outside diameter's am I looking for?

Suggestions on a post card as usual.

Thanks guys

jedidude04 · Post by **jedidude04** » Fri Jul 22, 2016 7:59 am

From a stock nc35 washer - 12mm outer diameter and roughly 4mm inner diameter.

Ricks washers are pretty spot on and fairly cheap..

Post by **Malc** » Fri Jul 22, 2016 8:39 am

A plain old 4mm washer is the right size and half millimetre thick - two per needle is perfect.

st22041967 · Post by **st22041967** » Fri Jul 22, 2016 11:16 am

Thanks guys.

I did look on Rick O's Stock sheet but he doesn't list them as individual items, just as part of kits, hence the question.

NC30 1mm Neelle Shimms (Washers)

NC30 1mm Neelle Shimms (Washers)

Re: NC30 1mm Neelle Shimms (Washers)

Re: NC30 1mm Neelle Shimms (Washers)

Re: NC30 1mm Neelle Shimms (Washers)