are all cb400sf discs the same?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: are all cb400sf discs the same?

Post by royster81 »

Webike list sunstar discs for both CB and VFR as model number KC501H.

http://japan.webike.net/HONDA/CB400SF/B ... 5/1012/mc/


http://japan.webike.net/HONDA/VFR400R/B ... 2/1012/mc/

Then I found these on yahoo Japan

http://page22.auctions.yahoo.co.jp/jp/a ... l328970819

So taking on board webike listing the same discs and the Ad listing for both models I'm going to stick my neck out and say VFR discs should fit the vtec.....

Time to trail fit a set I think.....
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: are all cb400sf discs the same?

Post by royster81 »

In the end I fitted VFR400R discs.
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
kayzaki78
Settled in member
Posts: 31
Joined: Thu Apr 28, 2016 4:09 am
Bike owned: cb400 sf
Location: Kuala Lumpur, Malaysia
Re: are all cb400sf discs the same?

Post by kayzaki78 »

If I'm not mistaken CBR600 is a perfect match, I'm going to find out about it today and will update you guys :peace:
User avatar
royster81
NWAA Supporter
NWAA Supporter
Posts: 2509
Joined: Wed Apr 30, 2008 8:04 pm
Bike owned: VFR400R-L NC30 CBR400RR-R NC29
Location: Belfast,Northern Ireland
Re: are all cb400sf discs the same?

Post by royster81 »

Some CBR600 discs fit the VFR400R and VFR400R discs fit the CB400SF spec 1 vtec so it's very possible CBR600 discs fit the CB400SF spec 1
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
User avatar
JZH
Site Supporter
Site Supporter
Posts: 249
Joined: Mon Oct 27, 2008 7:02 pm
Bike owned: RSCBRRVFVFRST
Location: London, UK/So.Cal., USA
Contact:
Re: are all cb400sf discs the same?

Post by JZH »

Understanding the CB400 series has always been challenging to me because of the bike's long production run with very few substantial changes during that period. I've noticed that there is a lot of conflicting information out there on the Web--not only from retailers but also from aftermarket manufacturers... The best I can do right now is the following:

The pre-VTEC CB400SF NC31 (1992-1998) discs measure 296 x 62 x 23 (OD, ID, offset). This is apparently the same as the CB-1 and the 1998-99 CB600F Hornet, but not much else (due to the offset).

The Spec I CB400SF Hyper VTEC NC39 (1999-2001) uses "mid" CBR900RR-type discs: 296 x 58 x 17, which are shared (in dimensions if not always in appearance) with the NC23, NC29, NC30, NC35, CBR600FS-W, VFR750FR-V, CBR900RRR-V and VTR1000FW-7 (among others, possibly).

Ciao,
JZH

London, UK/So.Cal., USA
www.vsource.org

Post Reply